Yr Athro Nicholas Lavery

Athro

Mechanical Engineering

+44 (0) 1792 606873

n.p.lavery@abertawe.ac.uk

Siaradwr Cymraeg Sylfaenol

403
Pedwerydd Llawr
Adeilad Gogleddol Peirianneg
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0003-0953-5936

Trosolwg

MA (Hons), MSc, PhD, MIMA, Prof Grad IMMM, FHEA
Dr Nicholas Lavery yw Cyfarwyddwr Canolfan Uwch Briodweddau Deunydd (MACH1), a’r academydd sy’n arwain y grwp Ymchwil Gweithgynhyrchu Ychwanegion Abertawe (SAMR) .

Yn fras, mae diddordebau ymchwil Dr Lavery yn canolbwyntio ar ddefnyddio mesuriad priodwedd deunydd, modelu cyfrifiannol ac astudiaethau arbrofol i ddatblygu prosesau a deunyddiau gweithgynhyrchu diwydiannol, gyda rhaglenni i gynnyrch peirianneg o fewn cynnyrch awyrofod, meddygol, modurol ac ynni.
Meysydd ymchwil cyfredol:

Gweithgynhyrchu Ychwanegion yn benodol ymasiad powdr laser (PBF)
Profi Priodweddau Deunydd Trwybwn Uchel (MACH1)
Modelu cyfrifiannol o brosesau gweithgynhyrchu amrywiol (Gweithgynhyrchu Haen Ychwanegion, Allwthiad, Gwasgu Powdr Isostatig, Sintro …)
Prototeipo Aloi Cyflym
Asesu Cylch Bywyd

Wedi treulio amser yn y byd academaidd a diwydiannol, rydw i wedi sefydlu ystod eang o gydweithrediad ymchwil rhyngwladol ac fe adlewyrchir hyn gan y nifer o wahoddiadau i ddatblygu a chymryd rhan mewn amryw o gynigion EC FP7/H2020.
Rydw i’n adolygydd nodedig cydnabyddedig i’r cyhoeddiadau canlynol: Journal of Alloys and Compounds, the Journal of Additive Manufacturing and the Journal of Applied Mathematical Modelling.
Rydw i wedi bod yn adolygydd rhyngwladol ar gyfer cynigion gweithgynhyrchu ychwanegion i Sefydliad Arloesedd Canada a Chyngor Ymchwil Gwyddonol a Pheirianneg Singapore.

Meysydd Arbenigedd

Gweithgynhyrchu Haen Ychwanegion
Priodweddau Deunydd Trwybwn Uchel
Datblygiad Aloi Newydd
Aml-ffiseg gyda Dynameg Hylifol Cyfrifiannol
Dadansoddi Elfennau Meidraidd
Asesu Cylch Bywyd
Modelu Cyfrifiannol

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Deirmina, F., Quarzago, L., Butcher, D., Bettini, E., Mehraban, S., Hann, J., Pettersson, N., Lavery, N., Röttger, A., & Pellizzari, M. (2024). General investigations on the heat treatment and thermal fatigue behavior of an experimental hot work tool steel tailored for laser powder bed fusion. Materials Science and Engineering: A, 901, 146554
https://doi.org/10.1016/j.msea.2024.146554, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66217
Haley, J., Jones, S., Mehraban, S., Lavery, N., Cullen, J., Carter, M., Moody, M., Dawson, H., & Bowden, D. (2024). Short communication: Complete dissolution of MX-phase nanoprecipitates in fusion steels during irradiation by heavy-ions. Journal of Nuclear Materials, 596, 155115
https://doi.org/10.1016/j.jnucmat.2024.155115, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66197
Beynon, D., Burton, M., Mehraban, S., Beynon, D., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). 3D Printed SnSe Thermoelectric Generators with High Figure of Merit. Advanced Energy Materials, 9(26)
https://doi.org/10.1002/aenm.201900201, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50643
Riva, S., Brown, S., Lavery, N., Tudball, A., Yusenko, K., & Brown, S. (2019). Spark Plasma Sintering of High Entropy Alloys. Spark Plasma Sintering of Materials -538). Springer, Cham
https://doi.org/10.1007/978-3-030-05327-7_18, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50184
Sillars, S., Sutcliffe, C., Philo, A., Brown, S., Sienz, J., & Lavery, N. (2018). The three-prong method: a novel assessment of residual stress in laser powder bed fusion. Virtual and Physical Prototyping, 13(1), 20-25.
https://doi.org/10.1080/17452759.2017.1392682, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa36037
Riva, S., Lavery, N., Yusenko, K., & Brown, S. (2018). Scandium-based hexagonally-closed packed multi-component alloys. Physics of Metals and Metallography(8)
https://doi.org/10.1134/S0031918X18080112, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37646
Yusenko, K., Riva, S., Crichton, W., Spektor, K., Bykova, E., Pakhomova, A., Tudball, A., Kupenko, I., Rohrbach, A., Klemme, S., Mazzali, F., Margadonna, S., Lavery, N., & Brown, S. (2018). High-pressure high-temperature tailoring of High Entropy Alloys for extreme environments. Journal of Alloys and Compounds, 738, 491-500.
https://doi.org/10.1016/j.jallcom.2017.12.216, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37789
Riva, S., Mehraban, S., Lavery, N., Schwarzmüller, S., Oeckler, O., Brown, S., Yusenko, K., & Brown, S. (2018). The Effect of Scandium Ternary Intergrain Precipitates in Al-Containing High-Entropy Alloys. Entropy, 20(7), 488
https://doi.org/10.3390/e20070488, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40823
Philo, A., Mehraban, S., Holmes, M., Sillars, S., Sutcliffe, C., Sienz, J., Brown, S., & Lavery, N. (2019). A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion. International Journal of Advanced Manufacturing Technology, 101(1-4), 697-714.
https://doi.org/10.1007/s00170-018-2770-7, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa45563
http://dx.doi.org/10.1007/s00170-018-2770-7
Burton, M., Mehraban, S., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). Earth abundant, non-toxic, 3D printed Cu2−xS with high thermoelectric figure of merit. Journal of Materials Chemistry A, 7(44), 25586-25592.
https://doi.org/10.1039/c9ta10064d, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52609
Adhikari, S., Mukhopadhyay, T., Shaw, A., & Lavery, N. (2020). Apparent negative values of Young’s moduli of lattice materials under dynamic conditions. International Journal of Engineering Science, 150, 103231
https://doi.org/10.1016/j.ijengsci.2020.103231, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53739
Calvo-Dahlborg, M., Dahlborg, U., Cornide, J., Mehraban, S., Leong, Z., Hansen, T., Wunderlich, R., Goodall, R., Lavery, N., & Brown, S. (2020). Structural investigation of the stability in temperature of some high entropy / multi major components alloys as a function of their electronic structure. Journal of Alloys and Compounds, 837, 155496
https://doi.org/10.1016/j.jallcom.2020.155496, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54200
Farrugia, D., Brown, S., Lavery, N., Pleydell-Pearce, C., Davis, C., & Pleydell-Pearce, C. (2020). Rapid Alloy Prototyping for a range of strip related advanced steel grades. Procedia Manufacturing, 50(Special Issue), 784-790.
https://doi.org/10.1016/j.promfg.2020.08.141, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55156
http://dx.doi.org/10.1016/j.promfg.2020.08.141
Calvo-Dahlborg, M., Mehraban, S., Lavery, N., Brown, S., Cornide, J., Cullen, J., Cieslak, J., Leong, Z., Goodall, R., & Dahlborg, U. (2021). Prediction of phase, hardness and density of high entropy alloys based on their electronic structure and average radius. Journal of Alloys and Compounds, 865, 158799
https://doi.org/10.1016/j.jallcom.2021.158799, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56238
Zhang, L., Harrison, W., Yar, M., Brown, S., & Lavery, N. (2021). The development of miniature tensile specimens with non-standard aspect and slimness ratios for rapid alloy prototyping processes. Journal of Materials Research and Technology, 15, 1830-1843.
https://doi.org/10.1016/j.jmrt.2021.09.029, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57901
Grech, I., Sullivan, J., Lancaster, R., Plummer, J., & Lavery, N. (2022). The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Additive Manufacturing, 58, 103072
https://doi.org/10.1016/j.addma.2022.103072, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60813
Zhang, L., Harrison, W., Yar, M., Mehraban, S., Brown, S., & Lavery, N. (2023). Use of miniaturized tensile specimens to evaluate the ductility and formability of dual phased steels for Rapid Alloy Prototyping. Materials Science and Engineering: A, 875, 145075
https://doi.org/10.1016/j.msea.2023.145075, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63239
http://dx.doi.org/10.1016/j.msea.2023.145075
Burton, M., Howells, G., Mehraban, S., McGettrick, J., Lavery, N., & Carnie, M. (2023). Fully 3D Printed Tin Selenide (SnSe) Thermoelectric Generators with Alternating n-Type and p-Type Legs. ACS Applied Energy Materials, 6(10), 5498-5507.
https://doi.org/10.1021/acsaem.3c00576, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63518
http://dx.doi.org/10.1021/acsaem.3c00576
Howells, G., Mehraban, S., McGettrick, J., Lavery, N., Carnie, M., & Burton, M. (2023). Rapid Printing of Pseudo-3D Printed SnSe Thermoelectric Generators Utilizing an Inorganic Binder. ACS Applied Materials & Interfaces, 15(19), 23068-23076.
https://doi.org/10.1021/acsami.3c01209, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63519
http://dx.doi.org/10.1021/acsami.3c01209
Zhang, L., Harrison, W., Abdullah, T., Mehraban, S., & Lavery, N. (2023). Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping. Applied Mathematical Modelling, 124, 713-733.
https://doi.org/10.1016/j.apm.2023.08.022, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64105
Zhang, L., Harrison, W., Mehraban, S., Brown, S., & Lavery, N. (2023). Size Effect on the Post-Necking Behaviour of Dual-Phase 800 Steel: Modelling and Experiment. Materials, 16(4), 1458
https://doi.org/10.3390/ma16041458, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66155
Butcher, D., Cullen, J., Barron, N., Mehraban, S., Calvo-Dahlborg, M., Brown, S., & Lavery, N. (2022). Development of a High Entropy Alloy AlX(CoCrCuFeNi)1-X for Diverse Security Applications. In The Minerals, Metals and Materials Series (pp. 543-554). Springer International Publishing.
https://doi.org/10.1007/978-3-030-92381-5_50, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66157
Yar, M., Norrish, C., Cullen, J., Zhang, L., Brown, S., Underhill, R., & Lavery, N. (2022). Small-Scale Rapid Alloy Prototyping of Extra-Low Carbon Steel to Investigate the Effects of Cu and Cr Residuals. In The Minerals, Metals and Materials Series (pp. 1202-1213). Springer International Publishing.
https://doi.org/10.1007/978-3-030-92381-5_114, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66158
Li, Z., Zhang, L., Ma, D., Lavery, N., & Wang, E. (2021). A narrative review: The electromagnetic field arrangement and the “braking” effect of electromagnetic brake (EMBr) technique in slab continuous casting. Metallurgical Research and Technology, 118(2), 218
https://doi.org/10.1051/metal/2021016, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66159
Johnson, R., Grech, I., Wint, N., & Lavery, N. (2020). Effect of Build Bed Location on Density and Corrosion Properties of Additively Manufactured 17-4PH Stainless Steel. In Sustainable Design and Manufacturing 2020 (pp. 425-438). Springer Singapore.
https://doi.org/10.1007/978-981-15-8131-1_38, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66160
Zhang, W., Zhou, H., Falkner, B., Singh, S., Mehta, A., Milward, S., Butcher, D., Lavery, N., & Brown, S. (2021). 3D Metal Printed Polarization Reconfigurable Horn Antenna with Solid & Meshed Structures: Future works for SATCOM applications. In 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science MeetingIEEE.
https://doi.org/10.1109/ieeeconf35879.2020.9329613, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66161
Philo, A., Sutcliffe, C., Group, S., Sienz, J., Brown, S., & Lavery, N. (2020). A study into the effects of gas flow inlet design of the Renishaw AM250 laser powder bed fusion machine using computational modelling. In 2017 International Solid Freeform Fabrication Symposium
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66162
https://repositories.lib.utexas.edu/items/55a127a4-d934-43a5-8af1-cb9b90668a87
Rosser, J., Megahed, ., Mindt, ., Brown, S., & Lavery, N. (2019). Computational Modelling and Experimental Validation of Single In625 Line Tracks in Laser Powder Bed Fusion. In Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66164
https://repositories.lib.utexas.edu/items/eaf50f2a-406c-4cfa-b3cf-75335ac9f8fb
Grech, I., Lavery, N., Wint, N., & Sullivan, J. (2019). Evaluating the Corrosion Performance of Wrought and Additively Manufactured (AM) Invar ® and 17-4PH. In Conference: Solid Freeform Fabrication Symposium (2019)
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66165
Adhikari, S., Shaw, A., Mukhopadhyay, T., & Lavery, N. (2019). Negative In-plane Elastic Moduli of Metallic Lattices: Experimental Investigations. In 10th International Conference on Metamaterials, Photonic Crystals and Plasmonics, META 2019META Publishing.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66166
https://metapublishing.org/index.php/MP/catalog/book/65
Butcher, D., Christie, S., Brown, S., & Lavery, N. (2019). Validated Computational Modelling Techniques for Simulating Melt Pool Ejecta In Laser Powder Bed Fusion Processing. In 2019 International Solid Freeform Fabrication Symposium
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66167
Eckermann, J., Mehmood, S., Davies, H., Lavery, N., Brown, S., Sienz, J., Jones, A., Sommerfeld, P., Brown, S., Sienz, J., Lavery, N., & Davies, H. (2014). Computational modeling of creep-based fatigue as a means of selecting lead-free solder alloys. Microelectronics Reliability, 54(6-7), 1235-1242.
https://doi.org/10.1016/j.microrel.2014.02.017, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22172
Riva, S., Fung, C., Searle, J., Clark, R., Lavery, N., Brown, S., Yusenko, K., & Brown, S. (2016). Formation and Disruption of W-Phase in High-Entropy Alloys. Metals, 6(5), 106
https://doi.org/10.3390/met6050106, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa27735
Riva, S., Yusenko, K., Lavery, N., Jarvis, D., Brown, S., Brown, S., Lavery, N., & Yusenko, K. (2016). The scandium effect in multicomponent alloys. International Materials Reviews, 61(3), 203-228.
https://doi.org/10.1080/09506608.2015.1137692, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28287
Matallah, H., Newton, W., James, D., Cameron, I., Sienz, J., Romocki, S., & Lavery, N. (2016). The development of a sub-atmospheric two-phase thermosyphon natural gas preheater using a lumped capacitance model and comparison with experimental results. Applied Thermal Engineering, 104, 767-778.
https://doi.org/10.1016/j.applthermaleng.2016.05.078, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28303
Worsley, D., Lavery, N., & Mabbett, I. (2016). Mathematical framework for predicting the thermal behaviour of spectrally selective coatings within an industrial near-infrared furnace. European Journal of Computational Mechanics, 25(3), 294-308.
https://doi.org/10.1080/17797179.2016.1212628, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29270
Lavery, N., Cherry, J., Mehmood, S., Davies, H., Girling, B., Sackett, E., Brown, S., & Sienz, J. (2017). Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion. Materials Science and Engineering: A, 693, 186-213.
https://doi.org/10.1016/j.msea.2017.03.100, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30238
Zhang, L., Belblidia, F., Davies, H., Lavery, N., Brown, S., & Davies, D. (2017). Optimizing gate location to reduce metal wastage: Co–Cr–W alloy filling simulation. Journal of Materials Processing Technology, 240, 249-254.
https://doi.org/10.1016/j.jmatprotec.2016.09.027, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30309
Mehraban, S., Malone, J., Lavery, N., Sullivan, J., Penney, D., & Brown, S. (2017). Increased Corrosion Resistance of Zinc Magnesium Aluminum Galvanised Coating through Germanium Additions. In ECS Transactions (pp. 1-15).
https://doi.org/10.1149/07530.0001ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32175
Holmes, M., Penney, D., Lavery, N., Brown, S., Brown, S., Lavery, N., & Penney, D. (2017). A numerical investigation assessing the symmetry of burden charging in a blast furnace using different chute designs. Ironmaking & Steelmaking, 1-9.
https://doi.org/10.1080/03019233.2017.1303893, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32295
Mindt, H., Megahed, M., Lavery, N., Giordimaina, A., & Brown, S. (2016). Verification of Numerically Calculated Cooling Rates of Powder bed Additive Manufacturing. TMS 2016 145th Annual Meeting & Exhibition (pp. 205-212). Springer International Publishing
https://doi.org/10.1007/978-3-319-48254-5_26, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23985
Cherry, J., Davies, H., Mehmood, S., Lavery, N., Brown, S., Sienz, J., Brown, S., Sienz, J., Lavery, N., & Davies, H. (2015). Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting. The International Journal of Advanced Manufacturing Technology, 76(5-8), 869-879.
https://doi.org/10.1007/s00170-014-6297-2, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18363
Lavery, N., Mehraban, S., Pleydell-Pearce, C., Brown, S., Jarvis, D., Voice, W., Brunnock, M., Brown, S., Lavery, N., & Pleydell-Pearce, C. (2015). Combinatorial development and high throughput materials characterisation of steels. Ironmaking & Steelmaking, 42(10), 727-733.
https://doi.org/10.1179/0301923315Z.000000000419, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23038
Cieslak, J., Tobola, J., Przewoznik, J., Berent, K., Dahlborg, U., Cornide, J., Mehraban, S., Lavery, N., Calvo-Dahlborg, M., & Lavery, N. (2019). Multi-phase nature of sintered vs. arc-melted CrxAlFeCoNi high entropy alloys - experimental and theoretical study. Journal of Alloys and Compounds
https://doi.org/10.1016/j.jallcom.2019.06.121, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50812
Marinelli, G., Martina, F., Lewtas, H., Hancock, D., Mehraban, S., Lavery, N., Ganguly, S., & Williams, S. (2019). Microstructure and thermal properties of unalloyed tungsten deposited by wire + Arc Additive Manufacturing. Journal of Nuclear Materials, 522, 45-53.
https://doi.org/10.1016/j.jnucmat.2019.04.049, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50198
Kunčická, L., Kocich, R., Ryukhtin, V., Cullen, J., & Lavery, N. (2019). Study of structure of naturally aged aluminium after twist channel angular pressing. Materials Characterization
https://doi.org/10.1016/j.matchar.2019.03.045, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49885
Lavery, N. & Sienz, J. (2017). The influence of powder ageing characteristics on 316l stainless steel processed by laser based powder bed fusion. In Proceedings Euro PM 2017: International Powder Metallurgy Congress and ExhibitionInternational Powder Metallurgy Congress and Exhibition, Euro PM 2017.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa46107
https://www.epma.com/publications/euro-pm-proceedings/product/ep17-3686473
Dahlborg, U., Gasser, J., Cuello, G., Mehraban, S., Lavery, N., Calvo-Dahlborg, M., & Lavery, N. (2018). Temperature and time dependent structure of the molten Ni81P19 alloy by neutron diffraction. Journal of Non-Crystalline Solids, 500, 359-365.
https://doi.org/10.1016/j.jnoncrysol.2018.08.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa43692
Mabbett, I., Brennan, D., Lavery, N., Charbonneau, C., Khan, K., Woods, R., Pursglove, A., Bryant, D., Watson, T., Worsley, D., & Lavery, N. (2015). Near Infrared sintering of a cost effective roll to roll water purification coating. In NSTI: Advanced Materials - TechConnect Briefs 2015
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38096
http://www.scopus.com/inward/record.url?eid=2-s2.0-84983301272&partnerID=MN8TOARS
Lavery, N. (2014). A Review of Computational Modelling of Additive Layer, Manufacturing - Multi-Scale and Multi-Physics.
https://doi.org/10.13140/RG.2.1.3103.0884, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38089
Riva, S., Tudball, A., Mehraban, S., Lavery, N., Brown, S., Yusenko, K., & Brown, S. (2018). A novel High-Entropy Alloy-based composite material. Journal of Alloys and Compounds, 730, 544-551.
https://doi.org/10.1016/j.jallcom.2017.09.274, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35713
Williams, E., Lavery, N., & Lavery, N. (2017). Laser processing of bulk metallic glass: A review. Journal of Materials Processing Technology, 247, 73-91.
https://doi.org/10.1016/j.jmatprotec.2017.03.034, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32932
Williams, E., Brousseau, E., Lavery, N., Mehraban, S., Hughes, C., & Harris, K. (2016). Nanosecond Laser Milling of the Amorphous Alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5. In 11th International Conference on Multi-Material Micro Manufacture (4M2016) co-organised with 10th International Workshop on Microfactories (IWMF2016) (pp. 199-202).
https://doi.org/10.3850/978-981-11-0749-8 699, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28723
Mindt, H., Megahed, M., Lavery, N., Holmes, M., & Brown, S. (2016). Powder Bed Layer Characteristics: The Overseen First-Order Process Input. Metallurgical and Materials Transactions A, 47, 3811-3822.
https://doi.org/10.1007/s11661-016-3470-2, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa27029
Holmes, M., Brown, R., Wauters, P., Brown, S., & Lavery, N. (2016). Bending and twisting friction models in soft-sphere discrete element simulations for static and dynamic problems. Applied Mathematical Modelling, 40(5-6), 3655-3670.
https://doi.org/10.1016/j.apm.2015.10.026, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26354
Newton, W., Lewis, M., Carswell, D., Lavery, N., Evans, B., Bould, D., Sienz, J., & Evans, B. (2014). Investigating the thermal profile of a marine vessel engine room through simulation with field measurements. Applied Thermal Engineering, 73(1), 1360-1370.
https://doi.org/10.1016/j.applthermaleng.2014.09.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18507
Wilson, B., Lavery, N., Jarvis, D., Anttila, T., Rantanen, J., Brown, S., Adkins, N., & Brown, S. (2013). Life cycle assessment of gas atomised sponge nickel for use in alkaline hydrogen fuel cell applications. Journal of Power Sources, 243, 242-252.
https://doi.org/10.1016/j.jpowsour.2013.05.186, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15167
http://www.sciencedirect.com/science/article/pii/S0378775313009907
Eckermann, J., Mehmood, S., Davies, H., Lavery, N., Brown, S., Sienz, J., Jones, A., Sommerfeld, P., Brown, S., & Lavery, N. (2013). Computational modelling of creep-based fatigue as a means of selecting lead-free solder alloys. In Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2013 14th International Conference on-8). IEEE Explore.
https://doi.org/10.1109/EuroSimE.2013.6529901, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15168
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6529901&tag=1
Lavery, N., Jarvis, D., Brown, S., Adkins, N., Wilson, B., & Brown, S. (2013). Life cycle assessment of sponge nickel produced by gas atomisation for use in industrial hydrogenation catalysis applications. The International Journal of Life Cycle Assessment, 18(2), 362-376.
https://doi.org/10.1007/s11367-012-0478-8, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14618
http://link.springer.com/article/10.1007/s11367-012-0478-8
Lavery, N., Jarvis, D., Voss, D., & Lavery, N. (2011). Emission mitigation potential of lightweight intermetallic TiAl components. Intermetallics, 19(6), 787-792.
https://doi.org/10.1016/j.intermet.2010.11.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12318
http://www.sciencedirect.com/science/article/pii/S0966979510004826
Heppener, M., Minster, O., Cacciapuoti, L., Jarvis, D., Lavery, N., Mazzoni, S., Norfolk, K., Orr, A., Pacros, A., Vincent-Bonnieu, S., Voss, D., & Lavery, N. (2008). Achievements in ESA'S physical science programme: Basic research and applications. In International Astronautical Federation - 59th International Astronautical Congress 2008, IAC 2008
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22977
http://www.scopus.com/inward/record.url?eid=2-s2.0-77950490949&partnerID=MN8TOARS
Jarvis, D., Voss, D., Lavery, N., & Lavery, N. (2007). Advanced intermetallic materials and processes: Overview of the impress integrated project. In TMS Annual Meeting
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22979
http://www.scopus.com/inward/record.url?eid=2-s2.0-51649092558&partnerID=MN8TOARS
Lavery, N. & Lavery, N. (2007). Mathematical framework for predicting solar thermal build-up of spectrally selective coatings at the Earth’s surface. Applied Mathematical Modelling, 31(8), 1635-1651.
https://doi.org/10.1016/j.apm.2006.05.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22978
http://www.scopus.com/inward/record.url?eid=2-s2.0-33847360074&partnerID=MN8TOARS
Lavery, N. & Lavery, N. (2007). Mathematical framework for predicting solar thermal build-up of spectrally selective coatings at the Earth’s surface. Applied Mathematical Modelling, 31(8), 1635-1651.
https://doi.org/10.1016/j.apm.2006.05.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12324
Carswell, D., Lavery, N., Brown, S., & Lavery, N. (2006). The Engineering of Sport 6
https://doi.org/10.1007/978-0-387-46050-5_75, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22983
http://www.scopus.com/inward/record.url?eid=2-s2.0-84892243519&partnerID=MN8TOARS
James, J., Brown, S., Spittle, J., Lavery, N., & Lavery, N. (2006). Experimental apparatus for validation of computer models of the permeability of metallic alloys in the mushy zone. In Modeling of Casting, Welding and Advanced Solidification Processes - XI
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22982
http://www.scopus.com/inward/record.url?eid=2-s2.0-33845231201&partnerID=MN8TOARS
Wilshire, B., Burt, H., Lavery, N., & Lavery, N. (2006). Prediction of long term stress rupture data for 2124
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22981
http://www.scopus.com/inward/record.url?eid=2-s2.0-37849032303&partnerID=MN8TOARS
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). View factor calculation using the Monte Carlo method and numerical sensitivity. Communications in Numerical Methods in Engineering, 22(3), 197-203.
https://doi.org/10.1002/cnm.805, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22980
http://www.scopus.com/inward/record.url?eid=2-s2.0-33644889633&partnerID=MN8TOARS
Carswell, D., Lavery, N., & Lavery, N. (2006). 3D solid fin model construction from 2D shapes using non-uniform rational B-spline surfaces. Advances in Engineering Software, 37(8), 491-501.
https://doi.org/10.1016/j.advengsoft.2006.01.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12323
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). New Experimental Data for the Validation of Radiative Heat Transfer. Experimental Heat Transfer, 19(3), 193-207.
https://doi.org/10.1080/08916150600619091, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12326
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). Numerical Sensitivity and View Factor Calculation Using the Monte Carlo Method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220(5), 697-702.
https://doi.org/10.1243/09544062jmes139, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12327
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2005). Benchmark experimental data for radiative heat transfer prediction. In 3rd M.I.T. Conference on Computational Fluid and Solid Mechanics
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22984
http://www.scopus.com/inward/record.url?eid=2-s2.0-33745152878&partnerID=MN8TOARS
Lavery, N., Brown, S., & Lavery, N. (2004). Heat Transfer Analysis of the Curing Process on an Organic Paint Strip Line. In ASME/JSME 2004 Pressure Vessels and Piping Conference Computational Technologies for Fluid/Thermal/Structural/Chemical Systems With Industrial Applications, Volume 1 (pp. 73-83).
https://doi.org/10.1115/PVP2004-3092, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22985
http://www.scopus.com/inward/record.url?eid=2-s2.0-8344244711&partnerID=MN8TOARS
Lavery, N., Taylor, C., & Lavery, N. (1999). Iterative and multigrid methods in the finite element solution of incompressible and turbulent fluid flow. International Journal for Numerical Methods in Fluids, 30(6), 609-634.
https://doi.org/10.1002/(sici)1097-0363(19990730)30:6<609::aid-fld733>3.0.co;2-6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12325
Milward, S., Lavery, N., Brown, S., Swygart, H., & Eccles, L. (2017). Controlling Thermal Expansion with Lattice Structures using Powder Bed Laser Fusion. In 2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017)2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017).
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35243
https://repositories.lib.utexas.edu/items/a9723e25-d56c-4d73-88a3-82c17ac66c77
Douglas, R., Barnard, N., Lavery, N., Sullivan, J., Jones, T., & Lancaster, R. (2024). The effect of powder recycling on the mechanical performance of laser powder bed fused stainless steel 316L. Additive Manufacturing, 88, 104245
https://doi.org/10.1016/j.addma.2024.104245, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66598

Holl Ymchwil

Erthyglau Cylchgronau

Haley, J., Jones, S., Mehraban, S., Lavery, N., Cullen, J., Carter, M., Moody, M., Dawson, H., & Bowden, D. (2024). Short communication: Complete dissolution of MX-phase nanoprecipitates in fusion steels during irradiation by heavy-ions. Journal of Nuclear Materials, 596, 155115
https://doi.org/10.1016/j.jnucmat.2024.155115, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66197
Douglas, R., Barnard, N., Lavery, N., Sullivan, J., Jones, T., & Lancaster, R. (2024). The effect of powder recycling on the mechanical performance of laser powder bed fused stainless steel 316L. Additive Manufacturing, 88, 104245
https://doi.org/10.1016/j.addma.2024.104245, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66598
Deirmina, F., Quarzago, L., Butcher, D., Bettini, E., Mehraban, S., Hann, J., Pettersson, N., Lavery, N., Röttger, A., & Pellizzari, M. (2024). General investigations on the heat treatment and thermal fatigue behavior of an experimental hot work tool steel tailored for laser powder bed fusion. Materials Science and Engineering: A, 901, 146554
https://doi.org/10.1016/j.msea.2024.146554, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66217
Zhang, L., Harrison, W., Abdullah, T., Mehraban, S., & Lavery, N. (2023). Formability prediction of interstitial-free steel via miniaturized tensile specimen for Rapid Alloy Prototyping. Applied Mathematical Modelling, 124, 713-733.
https://doi.org/10.1016/j.apm.2023.08.022, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64105
Zhang, L., Harrison, W., Yar, M., Mehraban, S., Brown, S., & Lavery, N. (2023). Use of miniaturized tensile specimens to evaluate the ductility and formability of dual phased steels for Rapid Alloy Prototyping. Materials Science and Engineering: A, 875, 145075
https://doi.org/10.1016/j.msea.2023.145075, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63239
http://dx.doi.org/10.1016/j.msea.2023.145075
Burton, M., Howells, G., Mehraban, S., McGettrick, J., Lavery, N., & Carnie, M. (2023). Fully 3D Printed Tin Selenide (SnSe) Thermoelectric Generators with Alternating n-Type and p-Type Legs. ACS Applied Energy Materials, 6(10), 5498-5507.
https://doi.org/10.1021/acsaem.3c00576, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63518
http://dx.doi.org/10.1021/acsaem.3c00576
Howells, G., Mehraban, S., McGettrick, J., Lavery, N., Carnie, M., & Burton, M. (2023). Rapid Printing of Pseudo-3D Printed SnSe Thermoelectric Generators Utilizing an Inorganic Binder. ACS Applied Materials & Interfaces, 15(19), 23068-23076.
https://doi.org/10.1021/acsami.3c01209, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63519
http://dx.doi.org/10.1021/acsami.3c01209
Zhang, L., Harrison, W., Mehraban, S., Brown, S., & Lavery, N. (2023). Size Effect on the Post-Necking Behaviour of Dual-Phase 800 Steel: Modelling and Experiment. Materials, 16(4), 1458
https://doi.org/10.3390/ma16041458, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66155
Grech, I., Sullivan, J., Lancaster, R., Plummer, J., & Lavery, N. (2022). The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Additive Manufacturing, 58, 103072
https://doi.org/10.1016/j.addma.2022.103072, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60813
Zhang, L., Harrison, W., Yar, M., Brown, S., & Lavery, N. (2021). The development of miniature tensile specimens with non-standard aspect and slimness ratios for rapid alloy prototyping processes. Journal of Materials Research and Technology, 15, 1830-1843.
https://doi.org/10.1016/j.jmrt.2021.09.029, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57901
Calvo-Dahlborg, M., Mehraban, S., Lavery, N., Brown, S., Cornide, J., Cullen, J., Cieslak, J., Leong, Z., Goodall, R., & Dahlborg, U. (2021). Prediction of phase, hardness and density of high entropy alloys based on their electronic structure and average radius. Journal of Alloys and Compounds, 865, 158799
https://doi.org/10.1016/j.jallcom.2021.158799, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56238
Li, Z., Zhang, L., Ma, D., Lavery, N., & Wang, E. (2021). A narrative review: The electromagnetic field arrangement and the “braking” effect of electromagnetic brake (EMBr) technique in slab continuous casting. Metallurgical Research and Technology, 118(2), 218
https://doi.org/10.1051/metal/2021016, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66159
Calvo-Dahlborg, M., Dahlborg, U., Cornide, J., Mehraban, S., Leong, Z., Hansen, T., Wunderlich, R., Goodall, R., Lavery, N., & Brown, S. (2020). Structural investigation of the stability in temperature of some high entropy / multi major components alloys as a function of their electronic structure. Journal of Alloys and Compounds, 837, 155496
https://doi.org/10.1016/j.jallcom.2020.155496, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54200
Adhikari, S., Mukhopadhyay, T., Shaw, A., & Lavery, N. (2020). Apparent negative values of Young’s moduli of lattice materials under dynamic conditions. International Journal of Engineering Science, 150, 103231
https://doi.org/10.1016/j.ijengsci.2020.103231, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53739
Farrugia, D., Brown, S., Lavery, N., Pleydell-Pearce, C., Davis, C., & Pleydell-Pearce, C. (2020). Rapid Alloy Prototyping for a range of strip related advanced steel grades. Procedia Manufacturing, 50(Special Issue), 784-790.
https://doi.org/10.1016/j.promfg.2020.08.141, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55156
http://dx.doi.org/10.1016/j.promfg.2020.08.141
Cieslak, J., Tobola, J., Przewoznik, J., Berent, K., Dahlborg, U., Cornide, J., Mehraban, S., Lavery, N., Calvo-Dahlborg, M., & Lavery, N. (2019). Multi-phase nature of sintered vs. arc-melted CrxAlFeCoNi high entropy alloys - experimental and theoretical study. Journal of Alloys and Compounds
https://doi.org/10.1016/j.jallcom.2019.06.121, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50812
Marinelli, G., Martina, F., Lewtas, H., Hancock, D., Mehraban, S., Lavery, N., Ganguly, S., & Williams, S. (2019). Microstructure and thermal properties of unalloyed tungsten deposited by wire + Arc Additive Manufacturing. Journal of Nuclear Materials, 522, 45-53.
https://doi.org/10.1016/j.jnucmat.2019.04.049, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50198
Kunčická, L., Kocich, R., Ryukhtin, V., Cullen, J., & Lavery, N. (2019). Study of structure of naturally aged aluminium after twist channel angular pressing. Materials Characterization
https://doi.org/10.1016/j.matchar.2019.03.045, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49885
Burton, M., Mehraban, S., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). Earth abundant, non-toxic, 3D printed Cu2−xS with high thermoelectric figure of merit. Journal of Materials Chemistry A, 7(44), 25586-25592.
https://doi.org/10.1039/c9ta10064d, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52609
Beynon, D., Burton, M., Mehraban, S., Beynon, D., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). 3D Printed SnSe Thermoelectric Generators with High Figure of Merit. Advanced Energy Materials, 9(26)
https://doi.org/10.1002/aenm.201900201, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50643
Philo, A., Mehraban, S., Holmes, M., Sillars, S., Sutcliffe, C., Sienz, J., Brown, S., & Lavery, N. (2019). A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion. International Journal of Advanced Manufacturing Technology, 101(1-4), 697-714.
https://doi.org/10.1007/s00170-018-2770-7, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa45563
http://dx.doi.org/10.1007/s00170-018-2770-7
Dahlborg, U., Gasser, J., Cuello, G., Mehraban, S., Lavery, N., Calvo-Dahlborg, M., & Lavery, N. (2018). Temperature and time dependent structure of the molten Ni81P19 alloy by neutron diffraction. Journal of Non-Crystalline Solids, 500, 359-365.
https://doi.org/10.1016/j.jnoncrysol.2018.08.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa43692
Riva, S., Lavery, N., Yusenko, K., & Brown, S. (2018). Scandium-based hexagonally-closed packed multi-component alloys. Physics of Metals and Metallography(8)
https://doi.org/10.1134/S0031918X18080112, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37646
Riva, S., Mehraban, S., Lavery, N., Schwarzmüller, S., Oeckler, O., Brown, S., Yusenko, K., & Brown, S. (2018). The Effect of Scandium Ternary Intergrain Precipitates in Al-Containing High-Entropy Alloys. Entropy, 20(7), 488
https://doi.org/10.3390/e20070488, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40823
Yusenko, K., Riva, S., Crichton, W., Spektor, K., Bykova, E., Pakhomova, A., Tudball, A., Kupenko, I., Rohrbach, A., Klemme, S., Mazzali, F., Margadonna, S., Lavery, N., & Brown, S. (2018). High-pressure high-temperature tailoring of High Entropy Alloys for extreme environments. Journal of Alloys and Compounds, 738, 491-500.
https://doi.org/10.1016/j.jallcom.2017.12.216, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37789
Riva, S., Tudball, A., Mehraban, S., Lavery, N., Brown, S., Yusenko, K., & Brown, S. (2018). A novel High-Entropy Alloy-based composite material. Journal of Alloys and Compounds, 730, 544-551.
https://doi.org/10.1016/j.jallcom.2017.09.274, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35713
Sillars, S., Sutcliffe, C., Philo, A., Brown, S., Sienz, J., & Lavery, N. (2018). The three-prong method: a novel assessment of residual stress in laser powder bed fusion. Virtual and Physical Prototyping, 13(1), 20-25.
https://doi.org/10.1080/17452759.2017.1392682, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa36037
Holmes, M., Penney, D., Lavery, N., Brown, S., Brown, S., Lavery, N., & Penney, D. (2017). A numerical investigation assessing the symmetry of burden charging in a blast furnace using different chute designs. Ironmaking & Steelmaking, 1-9.
https://doi.org/10.1080/03019233.2017.1303893, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32295
Williams, E., Lavery, N., & Lavery, N. (2017). Laser processing of bulk metallic glass: A review. Journal of Materials Processing Technology, 247, 73-91.
https://doi.org/10.1016/j.jmatprotec.2017.03.034, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32932
Lavery, N., Cherry, J., Mehmood, S., Davies, H., Girling, B., Sackett, E., Brown, S., & Sienz, J. (2017). Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion. Materials Science and Engineering: A, 693, 186-213.
https://doi.org/10.1016/j.msea.2017.03.100, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30238
Zhang, L., Belblidia, F., Davies, H., Lavery, N., Brown, S., & Davies, D. (2017). Optimizing gate location to reduce metal wastage: Co–Cr–W alloy filling simulation. Journal of Materials Processing Technology, 240, 249-254.
https://doi.org/10.1016/j.jmatprotec.2016.09.027, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30309
Worsley, D., Lavery, N., & Mabbett, I. (2016). Mathematical framework for predicting the thermal behaviour of spectrally selective coatings within an industrial near-infrared furnace. European Journal of Computational Mechanics, 25(3), 294-308.
https://doi.org/10.1080/17797179.2016.1212628, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29270
Mindt, H., Megahed, M., Lavery, N., Holmes, M., & Brown, S. (2016). Powder Bed Layer Characteristics: The Overseen First-Order Process Input. Metallurgical and Materials Transactions A, 47, 3811-3822.
https://doi.org/10.1007/s11661-016-3470-2, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa27029
Matallah, H., Newton, W., James, D., Cameron, I., Sienz, J., Romocki, S., & Lavery, N. (2016). The development of a sub-atmospheric two-phase thermosyphon natural gas preheater using a lumped capacitance model and comparison with experimental results. Applied Thermal Engineering, 104, 767-778.
https://doi.org/10.1016/j.applthermaleng.2016.05.078, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28303
Riva, S., Fung, C., Searle, J., Clark, R., Lavery, N., Brown, S., Yusenko, K., & Brown, S. (2016). Formation and Disruption of W-Phase in High-Entropy Alloys. Metals, 6(5), 106
https://doi.org/10.3390/met6050106, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa27735
Riva, S., Yusenko, K., Lavery, N., Jarvis, D., Brown, S., Brown, S., Lavery, N., & Yusenko, K. (2016). The scandium effect in multicomponent alloys. International Materials Reviews, 61(3), 203-228.
https://doi.org/10.1080/09506608.2015.1137692, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28287
Holmes, M., Brown, R., Wauters, P., Brown, S., & Lavery, N. (2016). Bending and twisting friction models in soft-sphere discrete element simulations for static and dynamic problems. Applied Mathematical Modelling, 40(5-6), 3655-3670.
https://doi.org/10.1016/j.apm.2015.10.026, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26354
Lavery, N., Mehraban, S., Pleydell-Pearce, C., Brown, S., Jarvis, D., Voice, W., Brunnock, M., Brown, S., Lavery, N., & Pleydell-Pearce, C. (2015). Combinatorial development and high throughput materials characterisation of steels. Ironmaking & Steelmaking, 42(10), 727-733.
https://doi.org/10.1179/0301923315Z.000000000419, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23038
Cherry, J., Davies, H., Mehmood, S., Lavery, N., Brown, S., Sienz, J., Brown, S., Sienz, J., Lavery, N., & Davies, H. (2015). Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting. The International Journal of Advanced Manufacturing Technology, 76(5-8), 869-879.
https://doi.org/10.1007/s00170-014-6297-2, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18363
Newton, W., Lewis, M., Carswell, D., Lavery, N., Evans, B., Bould, D., Sienz, J., & Evans, B. (2014). Investigating the thermal profile of a marine vessel engine room through simulation with field measurements. Applied Thermal Engineering, 73(1), 1360-1370.
https://doi.org/10.1016/j.applthermaleng.2014.09.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18507
Eckermann, J., Mehmood, S., Davies, H., Lavery, N., Brown, S., Sienz, J., Jones, A., Sommerfeld, P., Brown, S., Sienz, J., Lavery, N., & Davies, H. (2014). Computational modeling of creep-based fatigue as a means of selecting lead-free solder alloys. Microelectronics Reliability, 54(6-7), 1235-1242.
https://doi.org/10.1016/j.microrel.2014.02.017, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22172
Wilson, B., Lavery, N., Jarvis, D., Anttila, T., Rantanen, J., Brown, S., Adkins, N., & Brown, S. (2013). Life cycle assessment of gas atomised sponge nickel for use in alkaline hydrogen fuel cell applications. Journal of Power Sources, 243, 242-252.
https://doi.org/10.1016/j.jpowsour.2013.05.186, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15167
http://www.sciencedirect.com/science/article/pii/S0378775313009907
Lavery, N., Jarvis, D., Brown, S., Adkins, N., Wilson, B., & Brown, S. (2013). Life cycle assessment of sponge nickel produced by gas atomisation for use in industrial hydrogenation catalysis applications. The International Journal of Life Cycle Assessment, 18(2), 362-376.
https://doi.org/10.1007/s11367-012-0478-8, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14618
http://link.springer.com/article/10.1007/s11367-012-0478-8
Lavery, N., Jarvis, D., Voss, D., & Lavery, N. (2011). Emission mitigation potential of lightweight intermetallic TiAl components. Intermetallics, 19(6), 787-792.
https://doi.org/10.1016/j.intermet.2010.11.019, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12318
http://www.sciencedirect.com/science/article/pii/S0966979510004826
Lavery, N. & Lavery, N. (2007). Mathematical framework for predicting solar thermal build-up of spectrally selective coatings at the Earth’s surface. Applied Mathematical Modelling, 31(8), 1635-1651.
https://doi.org/10.1016/j.apm.2006.05.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22978
http://www.scopus.com/inward/record.url?eid=2-s2.0-33847360074&partnerID=MN8TOARS
Lavery, N. & Lavery, N. (2007). Mathematical framework for predicting solar thermal build-up of spectrally selective coatings at the Earth’s surface. Applied Mathematical Modelling, 31(8), 1635-1651.
https://doi.org/10.1016/j.apm.2006.05.007, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12324
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). View factor calculation using the Monte Carlo method and numerical sensitivity. Communications in Numerical Methods in Engineering, 22(3), 197-203.
https://doi.org/10.1002/cnm.805, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22980
http://www.scopus.com/inward/record.url?eid=2-s2.0-33644889633&partnerID=MN8TOARS
Carswell, D., Lavery, N., & Lavery, N. (2006). 3D solid fin model construction from 2D shapes using non-uniform rational B-spline surfaces. Advances in Engineering Software, 37(8), 491-501.
https://doi.org/10.1016/j.advengsoft.2006.01.002, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12323
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). New Experimental Data for the Validation of Radiative Heat Transfer. Experimental Heat Transfer, 19(3), 193-207.
https://doi.org/10.1080/08916150600619091, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12326
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2006). Numerical Sensitivity and View Factor Calculation Using the Monte Carlo Method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220(5), 697-702.
https://doi.org/10.1243/09544062jmes139, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12327
Lavery, N., Taylor, C., & Lavery, N. (1999). Iterative and multigrid methods in the finite element solution of incompressible and turbulent fluid flow. International Journal for Numerical Methods in Fluids, 30(6), 609-634.
https://doi.org/10.1002/(sici)1097-0363(19990730)30:6<609::aid-fld733>3.0.co;2-6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12325

Llyfrau Awdurol

Carswell, D., Lavery, N., Brown, S., & Lavery, N. (2006). The Engineering of Sport 6
https://doi.org/10.1007/978-0-387-46050-5_75, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22983
http://www.scopus.com/inward/record.url?eid=2-s2.0-84892243519&partnerID=MN8TOARS
Wilshire, B., Burt, H., Lavery, N., & Lavery, N. (2006). Prediction of long term stress rupture data for 2124
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22981
http://www.scopus.com/inward/record.url?eid=2-s2.0-37849032303&partnerID=MN8TOARS

Penodau Llyfrau

Riva, S., Brown, S., Lavery, N., Tudball, A., Yusenko, K., & Brown, S. (2019). Spark Plasma Sintering of High Entropy Alloys. Spark Plasma Sintering of Materials -538). Springer, Cham
https://doi.org/10.1007/978-3-030-05327-7_18, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50184
Mindt, H., Megahed, M., Lavery, N., Giordimaina, A., & Brown, S. (2016). Verification of Numerically Calculated Cooling Rates of Powder bed Additive Manufacturing. TMS 2016 145th Annual Meeting & Exhibition (pp. 205-212). Springer International Publishing
https://doi.org/10.1007/978-3-319-48254-5_26, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23985

Cyfraniadau Cynadleddau

Butcher, D., Cullen, J., Barron, N., Mehraban, S., Calvo-Dahlborg, M., Brown, S., & Lavery, N. (2022). Development of a High Entropy Alloy AlX(CoCrCuFeNi)1-X for Diverse Security Applications. In The Minerals, Metals and Materials Series (pp. 543-554). Springer International Publishing.
https://doi.org/10.1007/978-3-030-92381-5_50, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66157
Yar, M., Norrish, C., Cullen, J., Zhang, L., Brown, S., Underhill, R., & Lavery, N. (2022). Small-Scale Rapid Alloy Prototyping of Extra-Low Carbon Steel to Investigate the Effects of Cu and Cr Residuals. In The Minerals, Metals and Materials Series (pp. 1202-1213). Springer International Publishing.
https://doi.org/10.1007/978-3-030-92381-5_114, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66158
Zhang, W., Zhou, H., Falkner, B., Singh, S., Mehta, A., Milward, S., Butcher, D., Lavery, N., & Brown, S. (2021). 3D Metal Printed Polarization Reconfigurable Horn Antenna with Solid & Meshed Structures: Future works for SATCOM applications. In 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science MeetingIEEE.
https://doi.org/10.1109/ieeeconf35879.2020.9329613, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66161
Johnson, R., Grech, I., Wint, N., & Lavery, N. (2020). Effect of Build Bed Location on Density and Corrosion Properties of Additively Manufactured 17-4PH Stainless Steel. In Sustainable Design and Manufacturing 2020 (pp. 425-438). Springer Singapore.
https://doi.org/10.1007/978-981-15-8131-1_38, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66160
Philo, A., Sutcliffe, C., Group, S., Sienz, J., Brown, S., & Lavery, N. (2020). A study into the effects of gas flow inlet design of the Renishaw AM250 laser powder bed fusion machine using computational modelling. In 2017 International Solid Freeform Fabrication Symposium
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66162
https://repositories.lib.utexas.edu/items/55a127a4-d934-43a5-8af1-cb9b90668a87
Grech, I., Lavery, N., Wint, N., & Sullivan, J. (2019). Evaluating the Corrosion Performance of Wrought and Additively Manufactured (AM) Invar ® and 17-4PH. In Conference: Solid Freeform Fabrication Symposium (2019)
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66165
Adhikari, S., Shaw, A., Mukhopadhyay, T., & Lavery, N. (2019). Negative In-plane Elastic Moduli of Metallic Lattices: Experimental Investigations. In 10th International Conference on Metamaterials, Photonic Crystals and Plasmonics, META 2019META Publishing.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66166
https://metapublishing.org/index.php/MP/catalog/book/65
Butcher, D., Christie, S., Brown, S., & Lavery, N. (2019). Validated Computational Modelling Techniques for Simulating Melt Pool Ejecta In Laser Powder Bed Fusion Processing. In 2019 International Solid Freeform Fabrication Symposium
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66167
Rosser, J., Megahed, ., Mindt, ., Brown, S., & Lavery, N. (2019). Computational Modelling and Experimental Validation of Single In625 Line Tracks in Laser Powder Bed Fusion. In Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66164
https://repositories.lib.utexas.edu/items/eaf50f2a-406c-4cfa-b3cf-75335ac9f8fb
Lavery, N. & Sienz, J. (2017). The influence of powder ageing characteristics on 316l stainless steel processed by laser based powder bed fusion. In Proceedings Euro PM 2017: International Powder Metallurgy Congress and ExhibitionInternational Powder Metallurgy Congress and Exhibition, Euro PM 2017.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa46107
https://www.epma.com/publications/euro-pm-proceedings/product/ep17-3686473
Milward, S., Lavery, N., Brown, S., Swygart, H., & Eccles, L. (2017). Controlling Thermal Expansion with Lattice Structures using Powder Bed Laser Fusion. In 2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017)2017 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2017).
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35243
https://repositories.lib.utexas.edu/items/a9723e25-d56c-4d73-88a3-82c17ac66c77
Mehraban, S., Malone, J., Lavery, N., Sullivan, J., Penney, D., & Brown, S. (2017). Increased Corrosion Resistance of Zinc Magnesium Aluminum Galvanised Coating through Germanium Additions. In ECS Transactions (pp. 1-15).
https://doi.org/10.1149/07530.0001ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa32175
Williams, E., Brousseau, E., Lavery, N., Mehraban, S., Hughes, C., & Harris, K. (2016). Nanosecond Laser Milling of the Amorphous Alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5. In 11th International Conference on Multi-Material Micro Manufacture (4M2016) co-organised with 10th International Workshop on Microfactories (IWMF2016) (pp. 199-202).
https://doi.org/10.3850/978-981-11-0749-8 699, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28723
Mabbett, I., Brennan, D., Lavery, N., Charbonneau, C., Khan, K., Woods, R., Pursglove, A., Bryant, D., Watson, T., Worsley, D., & Lavery, N. (2015). Near Infrared sintering of a cost effective roll to roll water purification coating. In NSTI: Advanced Materials - TechConnect Briefs 2015
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38096
http://www.scopus.com/inward/record.url?eid=2-s2.0-84983301272&partnerID=MN8TOARS
Lavery, N. (2014). A Review of Computational Modelling of Additive Layer, Manufacturing - Multi-Scale and Multi-Physics.
https://doi.org/10.13140/RG.2.1.3103.0884, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38089
Eckermann, J., Mehmood, S., Davies, H., Lavery, N., Brown, S., Sienz, J., Jones, A., Sommerfeld, P., Brown, S., & Lavery, N. (2013). Computational modelling of creep-based fatigue as a means of selecting lead-free solder alloys. In Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2013 14th International Conference on-8). IEEE Explore.
https://doi.org/10.1109/EuroSimE.2013.6529901, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15168
http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6529901&tag=1
Heppener, M., Minster, O., Cacciapuoti, L., Jarvis, D., Lavery, N., Mazzoni, S., Norfolk, K., Orr, A., Pacros, A., Vincent-Bonnieu, S., Voss, D., & Lavery, N. (2008). Achievements in ESA'S physical science programme: Basic research and applications. In International Astronautical Federation - 59th International Astronautical Congress 2008, IAC 2008
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22977
http://www.scopus.com/inward/record.url?eid=2-s2.0-77950490949&partnerID=MN8TOARS
Jarvis, D., Voss, D., Lavery, N., & Lavery, N. (2007). Advanced intermetallic materials and processes: Overview of the impress integrated project. In TMS Annual Meeting
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22979
http://www.scopus.com/inward/record.url?eid=2-s2.0-51649092558&partnerID=MN8TOARS
James, J., Brown, S., Spittle, J., Lavery, N., & Lavery, N. (2006). Experimental apparatus for validation of computer models of the permeability of metallic alloys in the mushy zone. In Modeling of Casting, Welding and Advanced Solidification Processes - XI
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22982
http://www.scopus.com/inward/record.url?eid=2-s2.0-33845231201&partnerID=MN8TOARS
Vujičić, M., Lavery, N., Brown, S., & Lavery, N. (2005). Benchmark experimental data for radiative heat transfer prediction. In 3rd M.I.T. Conference on Computational Fluid and Solid Mechanics
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22984
http://www.scopus.com/inward/record.url?eid=2-s2.0-33745152878&partnerID=MN8TOARS
Lavery, N., Brown, S., & Lavery, N. (2004). Heat Transfer Analysis of the Curing Process on an Organic Paint Strip Line. In ASME/JSME 2004 Pressure Vessels and Piping Conference Computational Technologies for Fluid/Thermal/Structural/Chemical Systems With Industrial Applications, Volume 1 (pp. 73-83).
https://doi.org/10.1115/PVP2004-3092, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22985
http://www.scopus.com/inward/record.url?eid=2-s2.0-8344244711&partnerID=MN8TOARS

Goruchwyliaeth

Assessing the Bond Strength of Transition Welds Manufactured using Laser Powder Bed Fusion (LPBF) (cyfredol)

PhD

Goruchwyliwr arall: Prof Robert Lancaster
Repair of Next Generation Blisk Alloys Through Additive Manufacture «br /»«br /»«br /»«br /»«br /» (cyfredol)

PhD

Goruchwyliwr arall: Prof Robert Lancaster
Additively Manufactured Materials Allowables for Critical Applications (cyfredol)

PhD

Goruchwyliwr arall: Prof Robert Lancaster
Corrosion Behaviour of Additively Manufactured High Entropy Alloys (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Prof James Sullivan
The corrosion and mechanical performance of industry relevant additively manufactured steels and alloys (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Prof James Sullivan
The development of low particulate emissions coatings for disc brake components (cyfredol)

EngD

Goruchwyliwr arall: Prof Robert Lancaster
Development of novel medium to high entropy brazing alloys for aero-engine applications. (cyfredol)

EngD

Goruchwyliwr arall: Dr Jennifer Thompson
Additive layer manufacturing of next generation thermoelectric materials (cyfredol)

EngD

Goruchwyliwr arall: Prof Matt Carnie
Rapid Prototyping for the Production of Interstitial Free Steels (dyfarnwyd 2024)

EngD
Wear and Impact analysis of granular materials using discrete element method simulations (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Prof Steve Brown
Using Rapid Alloy Prototyping to Investigate the Effects of Residual Elements in Increased Scrap Recycling (dyfarnwyd 2024)

EngD

Goruchwyliwr arall: Prof Cameron Pleydell-Pearce
Modelling and validation of Laser Powder Bed Fusion for the Optimisation of Laser Parameters (cyfredol)

EngD

Goruchwyliwr arall: Prof Steve Brown
Advanced Manufacturing Techniques (cyfredol)

EngD

Goruchwyliwr arall: Dr Will Harrison
Numerical and Experimental Verification of Investment Casting Process (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Prof Steve Brown
Gas Flow Modelling and Validation for the design of new Particulate Collection systems in Laser Powder Bed Fusion. (dyfarnwyd 2024)

EngD

Goruchwyliwr arall: Prof Steve Brown
Melting and Atomization Optimisation of Metal Powders in Advanced Applications (dyfarnwyd 2024)

MSc

Goruchwyliwr arall: Mr Shahin Mehraban
Modelling of High Temperature Hot-Rolled Steel (dyfarnwyd 2023)

MSc

Modiwlau a Addysgir

EG-M37 Additive Manufacturing

1.1 Introduction to Additive Manufacturing 1.3 Additive Manufacturing Processes 1.3 Applications of Additive Manufacturing 1.4 Mechanics of the Powder Bed System 1.5 Physics of Additive Manufacturing 1.6 AM Defects and Process Control 1.7 Measurement and analysis of AM properties 1.8 Computer Aided Engineering of AM Parts 1.9 Powder Metals 1.10 Design for AM and part preparation
EGA266 Digital Manufacturing

Within this module students will learn about digital manufacturing, from its role in concept development through to prototype production and small batch manufacture. They will be introduced to the way in which manufacturing is changing and the future possibilities presented by emerging digital manufacturing technologies. They will work individually to fabricate a digital manufacturing machine (3DPrinter), which they will calibrate and produce test parts on, as well as their own design of a 3DPrinted engineering design.
EGA324 Mechanical Engineering Practice

The course builds on the knowledge and experience developed by the students in experimental studies during Level 2. A number of advanced scientific experiments will be undertaken. In addition, students will carry out a number of modelling benchmark problems in order to develop their ability to create appropriate models, interpret the predictions and compare them with alternative solutions.

Yr Athro Nick Lavery: Darlith Agoriadol, 2019

Professor Nick Lavery's Inaugural Lecture

Yr Athro Nicholas Lavery

Rhif ffôn

Cyfeiriad ebost

Welsh language proficiency

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Llyfrau Awdurol

Penodau Llyfrau

Cyfraniadau Cynadleddau

Goruchwyliaeth

Assessing the Bond Strength of Transition Welds Manufactured using Laser Powder Bed Fusion (LPBF) (cyfredol)

Repair of Next Generation Blisk Alloys Through Additive Manufacture «br /»«br /»«br /»«br /»«br /» (cyfredol)

Additively Manufactured Materials Allowables for Critical Applications (cyfredol)

Corrosion Behaviour of Additively Manufactured High Entropy Alloys (dyfarnwyd 2024)

The corrosion and mechanical performance of industry relevant additively manufactured steels and alloys (dyfarnwyd 2023)

The development of low particulate emissions coatings for disc brake components (cyfredol)

Development of novel medium to high entropy brazing alloys for aero-engine applications. (cyfredol)

Additive layer manufacturing of next generation thermoelectric materials (cyfredol)

Rapid Prototyping for the Production of Interstitial Free Steels (dyfarnwyd 2024)

Wear and Impact analysis of granular materials using discrete element method simulations (dyfarnwyd 2023)

Using Rapid Alloy Prototyping to Investigate the Effects of Residual Elements in Increased Scrap Recycling (dyfarnwyd 2024)

Modelling and validation of Laser Powder Bed Fusion for the Optimisation of Laser Parameters (cyfredol)

Advanced Manufacturing Techniques (cyfredol)

Numerical and Experimental Verification of Investment Casting Process (dyfarnwyd 2023)

Gas Flow Modelling and Validation for the design of new Particulate Collection systems in Laser Powder Bed Fusion. (dyfarnwyd 2024)

Melting and Atomization Optimisation of Metal Powders in Advanced Applications (dyfarnwyd 2024)

Modelling of High Temperature Hot-Rolled Steel (dyfarnwyd 2023)

Modiwlau a Addysgir

EG-M37 Additive Manufacturing

EGA266 Digital Manufacturing

EGA324 Mechanical Engineering Practice

Yr Athro Nick Lavery: Darlith Agoriadol, 2019