Yr Athro Trystan Watson

Athro

Materials Science and Engineering

t.m.watson@abertawe.ac.uk

Siaradwr Cymraeg Rhugl

Swyddfa Academaidd - A230
Ail lawr
Adeilad Dwyreinol Peirianneg
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0002-8015-1436

Trosolwg

Maes ymchwil yr Athro Watson yw ffilm denau PV wedi'i argraffu gydag arbenigedd mewn datblygu technolegau newydd ar gyfer cynhyrchu ffotofoltäegau newydd gan gynnwys prosesau dyddodi a chaledu a'u nodweddiadu gan ddefnyddio dulliau electrocemeg, ffotogemeg neu optoelectronig.

Ar hyn o bryd mae dadeni mewn ffotofoltäeg wedi'i argraffu mewn ffilm denau ac fel arfer mae'r datblygiadau hyn yn bodoli yn amgylchedd y labordy yn awr. Nod ymchwil yr Athro Watson yw cymryd y setiau materol hyn a datblygu'r llinell weithgynhyrchu ar gyfer gwneuthur ar raddfa. Mae dull gweithredu tair elfen yn cael ei ddefnyddio i gyflawni'r diben hwn (i) penderfynu ar fecanweithiau colli sy'n gysylltiedig â graddfa – gostyngiad mewn perfformiad wrth gynyddu o raddfa lab i raddfa beilot. (ii) Mynd i'r afael â thagfeydd proses i leihau amser gwneuthur (iii) Cyfieithu pensaernïol - sicrhau'r ystod ehangaf o is-haenau drwy adeiladu dyfeisiau ar ddalenni gwydr wedi'i prosesu a metel neu blastig rôl i rôl.

Yn benodol, mae ei weithgarwch ymchwil yn golygu haenu a chaledu deunyddiau ffotoactif, gweithgynhyrchu dyfeisiau PV ar raddfa lab ac is-fodiwl yn ogystal â nodweddiadu deunyddiau ffotoactif drwy ddulliau electrocemegol ac optoelectronig. Mae'r ymchwil yn ymestyn ar draws nifer o wahanol dechnolegau: celloedd solar wedi’u sensiteiddio â llifydd sy'n seiliedig ar hylif, celloedd solar cyflwr solet wedi’u sensiteiddio â llifydd, perofsgitau halid organoblwm ac yn fwy diweddar cesterid CZTS (Cu2ZnSnS4).

Meysydd Arbenigedd

Ffotofoltäegau Ffilm Tenau
Dyddodi a Chaledu
Graddio
Nodweddiadu Electrocemegol
Cyrydu
Celloedd Solar wedi’u Sensiteiddio â Llifydd
Perofsgitau Halid Organoblwm
Cesterid CZTS

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Wei, Z., Smith, B., De Rossi, F., Searle, J., Worsley, D., & Watson, T. (2019). Efficient and semi-transparent perovskite solar cells using a room-temperature processed MoOx/ITO/Ag/ITO electrode. Journal of Materials Chemistry C(35)
https://doi.org/10.1039/C9TC03684A, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51397
Chen, M., Liu, D., Li, W., Gurney, R., Li, D., Cai, J., Spooner, E., Kilbride, R., McGettrick, J., Watson, T., Li, Z., Jones, R., Lidzey, D., & Wang, T. (2019). Influences of Non-fullerene Acceptor Fluorination on Three-Dimensional Morphology and Photovoltaic Properties of Organic Solar Cells. ACS Applied Materials & Interfaces, 11(29), 26194-26203.
https://doi.org/10.1021/acsami.9b07317, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51386
Yilmaz, P., Greenwood, P., Meroni, S., Troughton, J., Novak, P., Li, X., Watson, T., & Briscoe, J. (2019). Self-adhesive electrode applied to ZnO nanorod-based piezoelectric nanogenerators. Smart Materials and Structures
https://doi.org/10.1088/1361-665X/ab255b, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51380
Kerremans, R., Sandberg, O., Meroni, S., Watson, T., Armin, A., & Meredith, P. (2019). On the Electro‐Optics of Carbon Stack Perovskite Solar Cells. Solar RRL, 1900221
https://doi.org/10.1002/solr.201900221, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51379
Yates, H., Meroni, S., Raptis, D., Hodgkinson, J., & Watson, T. (2019). Flame assisted chemical vapour deposition NiO hole transport layers for mesoporous carbon perovskite cells. Journal of Materials Chemistry C, 7(42), 13235-13242.
https://doi.org/10.1039/c9tc03922h, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51378
http://dx.doi.org/10.1039/c9tc03922h
Poli, I., Hintermair, U., Regue, M., Kumar, S., Sackville, E., Baker, J., Watson, T., Eslava, S., & Cameron, P. (2019). Graphite-protected CsPbBr3 perovskite photoanodes functionalised with water oxidation catalyst for oxygen evolution in water. Nature Communications, 10(1)
https://doi.org/10.1038/s41467-019-10124-0, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50291
http://dx.doi.org/10.1038/s41467-019-10124-0
Lin, C., De Rossi, F., Kim, J., Baker, J., Ngiam, J., Xu, B., Pont, S., Aristidou, N., Haque, S., Watson, T., McLachlan, M., & Durrant, J. (2019). Evidence for surface defect passivation as the origin of the remarkable photostability of unencapsulated perovskite solar cells employing aminovaleric acid as a processing additive. Journal of Materials Chemistry A, 7(7), 3006-3011.
https://doi.org/10.1039/C8TA11985F, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48968
Burkitt, D., Searle, J., Worsley, D., & Watson, T. (2018). Sequential Slot-Die Deposition of Perovskite Solar Cells Using Dimethylsulfoxide Lead Iodide Ink. Materials, 11(11), 2106
https://doi.org/10.3390/ma11112106, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa44925
De Rossi, F., Baker, J., Beynon, D., Hooper, K., Meroni, S., Williams, D., Wei, Z., Yasin, A., Charbonneau, C., Jewell, E., & Watson, T. (2018). All Printable Perovskite Solar Modules with 198 cm2 Active Area and Over 6% Efficiency. Advanced Materials Technologies, 3(11)
https://doi.org/10.1002/admt.201800156, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40885
Stoichkov, V., Bristow, N., Troughton, J., De Rossi, F., Watson, T., Kettle, J., & Watson, T. (2018). Outdoor performance monitoring of perovskite solar cell mini-modules: Diurnal performance, observance of reversible degradation and variation with climatic performance. Solar Energy, 170, 549-556.
https://doi.org/10.1016/j.solener.2018.05.086, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40653

Holl Ymchwil

Erthyglau Cylchgronau

Potts, S., Bolton, R., Dunlop, T., Lacey, K., Worsley, C., Watson, T., & Jewell, E. (2024). Enhancing the Performance of the Mesoporous TiO2 Film in Printed Perovskite Photovoltaics through High-Speed Imaging and Ink Rheology Techniques. Advanced Functional Materials, 34(36), 2401959
https://doi.org/10.1002/adfm.202401959, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66570
Worsley, C., Dunlop, T., Potts, S., Bolton, R., Jewell, E., & Watson, T. (2024). Infiltration issues in printed mesoporous carbon perovskite solar cells: a troubleshooting guide. Journal of Materials Chemistry C, 12(25), 9401-9411.
https://doi.org/10.1039/d4tc01157k, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66928
Parvazian, E., Beynon, D., Jenkins, O., Patidar, R., McGettrick, J., NGOMBE, S., Patil, B., Garcia Rodriguez, R., Valadez Villalobos, K., Davies, P., Davies, M., & Watson, T. (2024). Selecting non-halogenated low-toxic hole transporting materials for Roll-to-Roll perovskite solar cells using carbon electrodes. Communications Materials, 5(1)
https://doi.org/10.1038/s43246-024-00516-1, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66508
Zhao, G., Hughes, D., Beynon, D., Wei, Z., Watson, T., Tsoi, W., & Baker, J. (2024). Perovskite photovoltaics for aerospace applications − life cycle assessment and cost analysis. Solar Energy, 274, 112602
https://doi.org/10.1016/j.solener.2024.112602, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66413
Worsley, C., Potts, S., Hughes, D., Tsoi, W., & Watson, T. (2024). Age-induced excellence with green solvents: the impact of residual solvent and post-treatments in screen-printed carbon perovskite solar cells and modules. Materials Advances, 5(10), 4354-4365.
https://doi.org/10.1039/d4ma00136b, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66402
Worsley, C., Dunlop, T., Potts, S., Garcia Rodriguez, R., Bolton, B., Davies, M., Jewell, E., & Watson, T. (2024). Quantifying Infiltration for Quality Control in Printed Mesoscopic Perovskite Solar Cells: A Microscopic Perspective. ACS Applied Energy Materials, 7(5), 1938-1948.
https://doi.org/10.1021/acsaem.3c03056, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66062
Davies, K., Allan, M., Nagarajan, S., Townsend, R., Asokan, V., Watson, T., Godfrey, R., Maroto-Valer, M., Kuehnel, M., & Pitchaimuthu, S. (2023). Photoelectrocatalytic Surfactant Pollutant Degradation and Simultaneous Green Hydrogen Generation. Industrial and Engineering Chemistry Research, 62(45), 19084-19094.
https://doi.org/10.1021/acs.iecr.3c00840, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65139
Davies, K., Allan, M., Nagarajan, S., Townsend, R., Dunlop, T., McGettrick, J., Asokan, V., Ananthraj, S., Watson, T., Godfrey, R., Durrant, J., Maroto-Valer, M., Kuehnel, M., & Pitchaimuthu, S. (2023). Solar light-driven simultaneous pharmaceutical pollutant degradation and green hydrogen production using a mesoporous nanoscale WO3/BiVO4 heterostructure photoanode. Journal of Environmental Chemical Engineering, 11(3), 110256
https://doi.org/10.1016/j.jece.2023.110256, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63594
http://dx.doi.org/10.1016/j.jece.2023.110256
Koutsourakis, G., Worsley, C., Spence, M., Blakesley, J., Watson, T., Carnie, M., & Castro, F. (2023). Investigating spatial macroscopic metastability of perovskite solar cells with voltage dependent photoluminescence imaging. Journal of Physics: Energy, 5(2), 025008
https://doi.org/10.1088/2515-7655/acc892, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66403
Beynon, D., Parvazian, E., Hooper, K., McGettrick, J., Patidar, R., Dunlop, T., Wei, Z., Davies, P., Garcia Rodriguez, R., Carnie, M., Davies, M., Watson, T., Hooper, K., & Davies, P. (2023). All‐Printed Roll‐to‐Roll Perovskite Photovoltaics Enabled by Solution‐Processed Carbon Electrode. Advanced Materials, 35(16), 2208561
https://doi.org/10.1002/adma.202208561, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa62299
http://dx.doi.org/10.1002/adma.202208561
Li, B., Deng, J., Smith, J., Caprioglio, P., Ji, K., Luo, D., McGettrick, J., Jayawardena, K., Kilbride, R., Ren, A., Hinder, S., Bi, J., Webb, T., Marko, I., Liu, X., Xiang, Y., Reding, J., Li, H., Du, S...., & Zhang, W. (2022). Suppressing Interfacial Recombination with a Strong‐Interaction Surface Modulator for Efficient Inverted Perovskite Solar Cells. Advanced Energy Materials, 12(48), 2202868
https://doi.org/10.1002/aenm.202202868, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61965
Thirumalaisamu, L., Palanivel, S., Jeyakumar, K., Kunjithapatham, S., Watson, T., & Pitchaimuthu, S. (2022). The upsurge of absorption coefficient in CuInS2 thin film with Ru doping: an energetic absorber layer in a superstrate solar cell. Materials Today Chemistry, 26, 101217
https://doi.org/10.1016/j.mtchem.2022.101217, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61643
Richards, D., Burkitt, D., Patidar, R., Beynon, D., & Watson, T. (2022). Predicting a process window for the roll-to-roll deposition of solvent-engineered SnO2 in perovskite solar cells. Materials Advances, 0
https://doi.org/10.1039/d2ma00841f, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61921
Yan, D., Lu, X., Zhao, S., Zhang, Z., Lu, M., Feng, J., Zhang, J., Spencer, K., Watson, T., Li, M., Hou, B., Wang, F., & Li, Z. (2022). Lead Leaching of Perovskite Solar Cells in Aqueous Environments: A Quantitative Investigation. Solar RRL, 6(9), 2200332
https://doi.org/10.1002/solr.202200332, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60328
Jestine, J., Johnston, R., Pleydell-Pearce, C., Davies, P., Watson, T., Meroni, S., Worsley, C., Dimitrios, R., Dunlop, T., Mitchell, R., Volkenandt, T., Tordoff, B., Kelly, S., White, R., & Rad, M. (2022). Multimodal 3D Characterisation of Carbon-based Perovskite Solar Cells. Microscopy and Microanalysis, 28(S1), 204-206.
https://doi.org/10.1017/s1431927622001684, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63964
http://dx.doi.org/10.1017/s1431927622001684
Korukunda, T., Joshi, D., Meroni, S., Watson, T., & Dutta, V. (2022). Enhanced infiltration and morphology of bismuth perovskite in Carbon-stack solar cells – A synergistic effect of electric fields in modified spray technique. Solar Energy, 241, 386-395.
https://doi.org/10.1016/j.solener.2022.06.021, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60308
Spence, M., Hammond, R., Pockett, A., Wei, Z., Johnson, A., Watson, T., & Carnie, M. (2022). A Comparison of Different Textured and Non-Textured Anti-Reflective Coatings for Planar Monolithic Silicon-Perovskite Tandem Solar Cells. ACS Applied Energy Materials, 5(5), 5974-5982.
https://doi.org/10.1021/acsaem.2c00361, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61009
Berger, E., Bagheri, M., Asgari, S., Zhou, J., Kokkonen, M., Talebi, P., Luo, J., Nogueira, A., Watson, T., & Hashmi, S. (2022). Recent developments in perovskite-based precursor inks for scalable architectures of perovskite solar cell technology. Sustainable Energy and Fuels, 6(12), 2879-2900.
https://doi.org/10.1039/d2se00162d, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60578
Bou, A., Pockett, A., Cruanyes, H., Raptis, D., Watson, T., Carnie, M., & Bisquert, J. (2022). Limited information of impedance spectroscopy about electronic diffusion transport: The case of perovskite solar cells. APL Materials, 10(5), 051104
https://doi.org/10.1063/5.0087705, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61399
Delgado Gallardo, J., Sullivan, G., TOKARYK, M., Russell, J., Davies, G., Johns, K., Hunter, A., Watson, T., & Sarp, S. (2022). Disposable FFP2 and Type IIR Medical-Grade Face Masks: An Exhaustive Analysis into the Leaching of Micro- and Nanoparticles and Chemical Pollutants Linked to the COVID-19 Pandemic. ACS EST Water, 2(4), 527-538.
https://doi.org/10.1021/acsestwater.1c00319, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59905
Swartwout, R., Patidar, R., Belliveau, E., Dou, B., Beynon, D., Greenwood, P., Moody, N., deQuilettes, D., Bawendi, M., Watson, T., & Bulovic, V. (2022). Predicting Low Toxicity and Scalable Solvent Systems for High‐Speed Roll‐to‐Roll Perovskite Manufacturing. Solar RRL, 6(3), 2100567
https://doi.org/10.1002/solr.202100567, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58571
Lee, H., Stewart, K., Hughes, D., Barbé, J., Pockett, A., Kilbride, R., Heasman, K., Wei, Z., Watson, T., Carnie, M., Kim, J., & Tsoi, W. (2022). Proton Radiation Hardness of Organic Photovoltaics: An In‐Depth Study. Solar RRL, 6(6), 2101037
https://doi.org/10.1002/solr.202101037, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59314
Thomas, S., Pockett, A., Seunarine, K., Spence, M., Raptis, D., Meroni, S., Watson, T., Jones, M., & Carnie, M. (2022). Will the Internet of Things Be Perovskite Powered? Energy Yield Measurement and Real-World Performance of Perovskite Solar Cells in Ambient Light Conditions. IoT, 3(1), 109-121.
https://doi.org/10.3390/iot3010006, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59204
Pourjafari, D., Meroni, S., Domínguez, D., Escalante, R., Baker, J., Monroy, A., Walters, A., Watson, T., & Oskam, G. (2022). Strategies towards Cost Reduction in the Manufacture of Printable Perovskite Solar Modules. Energies, 15(2), 641
https://doi.org/10.3390/en15020641, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59242
Hughes, D., Meroni, S., Barbe, J., Raptis, D., Lee, H., Heasman, K., Lang, F., Watson, T., & Tsoi, W. (2021). Proton Radiation Hardness of Perovskite Solar Cells Utilizing a Mesoporous Carbon Electrode. Energy Technology, 9(12), 2100928
https://doi.org/10.1002/ente.202100928, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58615
Worsley, C., Raptis, D., Meroni, S., Patidar, R., Pockett, A., Dunlop, T., Potts, S., Bolton, B., Charbonneau, C., Carnie, M., Jewell, E., & Watson, T. (2021). Green solvent engineering for enhanced performance and reproducibility in printed carbon-based mesoscopic perovskite solar cells and modules. Materials Advances, 3(2), 1125-1138.
https://doi.org/10.1039/d1ma00975c, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60531
Barnett, C., McGettrick, J., Gangoli, V., Navarro Torres, J., Watson, T., Maffeis, T., Barron, A., & Orbaek White, A. (2021). Controlled and permanent induced Fermi shifts and upwards band bending in ZnO nanorods by surface stripping with argon bombardment. Materials Letters, 301, 130288
https://doi.org/10.1016/j.matlet.2021.130288, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57191
Dunlop, T., Kesteven, O., De Rossi, F., Davies, P., Watson, T., & Charbonneau, C. (2021). Exploring the Infiltration Features of Perovskite within Mesoporous Carbon Stack Solar Cells Using Broad Beam Ion Milling. Materials, 14(19), 5852
https://doi.org/10.3390/ma14195852, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58354
Ling, J., Kizhakkedath, P., Watson, T., Mora-Seró, I., Schmidt-Mende, L., Brown, T., & Jose, R. (2021). A Perspective on the Commercial Viability of Perovskite Solar Cells. Solar RRL, 5(11), 2100401
https://doi.org/10.1002/solr.202100401, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58101
Clarke, A., Luke, J., Meitzner, R., Wu, J., Wang, Y., Lee, H., Speller, E., Bristow, H., Cha, H., Newman, M., Hooper, K., Evans, A., Gao, F., Hoppe, H., McCulloch, I., Schubert, U., Watson, T., Durrant, J., Tsoi, W...., & Li, Z. (2021). Non-fullerene acceptor photostability and its impact on organic solar cell lifetime. Cell Reports Physical Science, 2(7), 100498
https://doi.org/10.1016/j.xcrp.2021.100498, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57328
Worsley, C., Raptis, D., Meroni, S., Doolin, A., Garcia Rodriguez, R., Davies, M., & Watson, T. (2021). γ‐Valerolactone: A Nontoxic Green Solvent for Highly Stable Printed Mesoporous Perovskite Solar Cells. Energy Technology, 9(7), 2100312
https://doi.org/10.1002/ente.202100312, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56735
Jones, B., Davies, K., Anantharaj, S., Mabbett, I., Watson, T., Durrant, J., Kuehnel, M., Pitchaimuthu, S., & Allan, M. (2021). Photoelectrochemical concurrent hydrogen generation and heavy metal recovery from polluted acidic mine water. Sustainable Energy & Fuels, 5(12), 3084-3091.
https://doi.org/10.1039/d1se00232e, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56744
Sullivan, G., Delgado Gallardo, J., Watson, T., & Sarp, S. (2021). An investigation into the leaching of micro and nano particles and chemical pollutants from disposable face masks - linked to the COVID-19 pandemic. Water Research, 196, 117033
https://doi.org/10.1016/j.watres.2021.117033, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56400
Pockett, A., Spence, M., Thomas, S., Raptis, D., Watson, T., & Carnie, M. (2021). Beyond the First Quadrant: Origin of the High Frequency Intensity‐Modulated Photocurrent/Photovoltage Spectroscopy Response of Perovskite Solar Cells. Solar RRL, 5(5), 2100159
https://doi.org/10.1002/solr.202100159, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56713
Delgado-Gallardo, J., Sullivan, G., Esteban, P., Wang, Z., Arar, O., Li, Z., Watson, T., & Sarp, S. (2021). From Sampling to Analysis: A Critical Review of Techniques Used in the Detection of Micro- and Nanoplastics in Aquatic Environments. ACS ES&T Water, 1(4), 748-764.
https://doi.org/10.1021/acsestwater.0c00228, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57170
Dunlop, T., Doolin, A., Charles, R., Castro, C., Garcia Rodriguez, R., Pean, E., Patidar, R., Dunlop, T., Charbonneau, C., Watson, T., & Davies, M. (2021). Sustainable solvent selection for the manufacture of methylammonium lead triiodide (MAPbI3) perovskite solar cells. Green Chemistry, 23(6), 2471-2486.
https://doi.org/10.1039/d1gc00079a, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56436
Omorogie, M., Babalola, J., Ismaeel, M., McGettrick, J., Watson, T., Dawson, D., Carta, M., & Kuehnel, M. (2021). Activated carbon from Nauclea diderrichii agricultural waste–a promising adsorbent for ibuprofen, methylene blue and CO2. Advanced Powder Technology, 32(3), 866-874.
https://doi.org/10.1016/j.apt.2021.01.031, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56331
http://dx.doi.org/10.1016/j.apt.2021.01.031
Meroni, S., Worsley, C., Raptis, D., & Watson, T. (2021). Triple-Mesoscopic Carbon Perovskite Solar Cells: Materials, Processing and Applications. Energies, 14(2), 386
https://doi.org/10.3390/en14020386, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57707
De Rossi, F., Barbe, J., Tanenbaum, D., Cinà, L., Castriotta, L., Stoichkov, V., Wei, Z., Tsoi, W., Kettle, J., Sadula, A., Chircop, J., Azzopardi, B., Xie, H., Carlo, A., Lira-Cantú, M., Katz, E., Watson, T., & Brunetti, F. (2020). An Interlaboratory Study on the Stability of All‐Printable Hole Transport Material–Free Perovskite Solar Cells. Energy Technology, 8(12), 2000134
https://doi.org/10.1002/ente.202000134, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54052
Bou, A., Pockett, A., Raptis, D., Watson, T., Carnie, M., & Bisquert, J. (2020). Beyond Impedance Spectroscopy of Perovskite Solar Cells: Insights from the Spectral Correlation of the Electrooptical Frequency Techniques. The Journal of Physical Chemistry Letters, 11(20), 8654-8659.
https://doi.org/10.1021/acs.jpclett.0c02459, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55378
Burkitt, D., Patidar, R., Greenwood, P., Hooper, K., McGettrick, J., Dmitrov, S., Colombo, M., Stoichkov, V., Richards, D., Beynon, D., Davies, M., & Watson, T. (2020). Roll-to-Roll Slot-Die Coated P-I-N Perovskite Solar Cells Using Acetonitrile Based Single Step Perovskite Solvent System. Sustainable Energy & Fuels, 4(7), 3340-3351.
https://doi.org/10.1039/d0se00460j, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54124
Lewis, A., Troughton, J., Smith, B., McGettrick, J., Dunlop, T., De Rossi, F., Pockett, A., Spence, M., Carnie, M., Watson, T., & Charbonneau, C. (2020). In-depth analysis of defects in TiO2 compact electron transport layers and impact on performance and hysteresis of planar perovskite devices at low light. Solar Energy Materials and Solar Cells, 209, 110448
https://doi.org/10.1016/j.solmat.2020.110448, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53418
Sullivan, G., Gallardo, J., Jones, E., Holliman, P., Watson, T., & Sarp, S. (2020). Detection of trace sub-micron (nano) plastics in water samples using pyrolysis-gas chromatography time of flight mass spectrometry (PY-GCToF).. Chemosphere, 249, 126179
https://doi.org/10.1016/j.chemosphere.2020.126179, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53513
Raptis, D., Stoichkov, V., Meroni, S., Pockett, A., Worsley, C., Carnie, M., Worsley, D., & Watson, T. (2020). Enhancing fully printable mesoscopic perovskite solar cell performance using integrated metallic grids to improve carbon electrode conductivity. Current Applied Physics, 20(5), 619-627.
https://doi.org/10.1016/j.cap.2020.02.009, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53566
Wei, Z., Dunlop, T., Heard, P., Charbonneau, C., Worsley, D., & Watson, T. (2020). Successes and Challenges Associated with Solution Processing of Kesterite Cu2ZnSnS4 Solar Cells on Titanium Substrates. ACS Applied Energy Materials, 3(4), 3876-3883.
https://doi.org/10.1021/acsaem.0c00292, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53824
http://dx.doi.org/10.1021/acsaem.0c00292
Lian, Q., Mokhtar, M., Lu, D., Zhu, M., Jacobs, J., Foster, A., Thomas, A., Spencer, B., Wu, S., Liu, C., Hodson, N., Smith, B., Alkaltham, A., Alkhudhari, O., Watson, T., & Saunders, B. (2020). Using Soft Polymer Template Engineering of Mesoporous TiO2 Scaffolds to Increase Perovskite Grain Size and Solar Cell Efficiency. ACS Applied Materials & Interfaces, 12(16), 18578-18589.
https://doi.org/10.1021/acsami.0c02248, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54160
Meroni, S., Hooper, K., Dunlop, T., Baker, J., Worsley, D., Charbonneau, C., Watson, T., Hooper, K., & Dunlop, T. (2020). Scribing Method for Carbon Perovskite Solar Modules. Energies, 13(7), 1589
https://doi.org/10.3390/en13071589, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53872
Pean, E., De Castro, C., Dimitrov, S., De Rossi, F., Meroni, S., Baker, J., Watson, T., & Davies, M. (2020). Investigating the Superoxide Formation and Stability in Mesoporous Carbon Perovskite Solar Cells with an Aminovaleric Acid Additive. Advanced Functional Materials, 30(12)
https://doi.org/10.1002/adfm.201909839, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53376
Yates, H., Hodgkinson, J., Meroni, S., Richards, D., & Watson, T. (2020). Flame Assisted Chemical Vapour Deposition of NiO hole transport layers for planar perovskite cells. Surface and Coatings Technology, 385, 125423
https://doi.org/10.1016/j.surfcoat.2020.125423, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53383
Patidar, R., Burkitt, D., Hooper, K., Richards, D., & Watson, T. (2020). Slot-die coating of perovskite solar cells: An overview. Materials Today Communications, 22, 100808
https://doi.org/10.1016/j.mtcomm.2019.100808, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52964
Kerremans, R., Sandberg, O., Meroni, S., Watson, T., Armin, A., & Meredith, P. (2020). On the Electro‐Optics of Carbon Stack Perovskite Solar Cells. Solar RRL, 4(2), 1900221
https://doi.org/10.1002/solr.201900221, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52738
Barbé, J., Pockett, A., Stoichkov, V., Hughes, D., Lee, H., Carnie, M., Watson, T., & Tsoi, W. (2020). In situ investigation of perovskite solar cells’ efficiency and stability in a mimic stratospheric environment for high-altitude pseudo-satellites. Journal of Materials Chemistry C, 8(5), 1715-1721.
https://doi.org/10.1039/c9tc04984c, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53136
http://dx.doi.org/10.1039/c9tc04984c
Pineda, R., Zems, Y., Troughton, J., Niazi, M., Perepichka, D., Watson, T., & Robertson, N. (2020). Star-shaped triarylamine-based hole-transport materials in perovskite solar cells. Sustainable Energy & Fuels, 4(2), 779-787.
https://doi.org/10.1039/c9se00366e, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52907
Khenkin, M., Katz, E., Abate, A., Bardizza, G., Berry, J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Carlo, A., Cheacharoen, R., Cheng, Y., Colsmann, A., Cros, S., Domanski, K., Dusza, M., Fell, C., Forrest, S., Galagan, Y...., & Lira-Cantu, M. (2020). Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures. Nature Energy, 5(1), 35-49.
https://doi.org/10.1038/s41560-019-0529-5, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53413
Wei, Z., Smith, B., De Rossi, F., Searle, J., Worsley, D., & Watson, T. (2019). Efficient and semi-transparent perovskite solar cells using a room-temperature processed MoOx/ITO/Ag/ITO electrode. Journal of Materials Chemistry C(35)
https://doi.org/10.1039/C9TC03684A, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51397
Yilmaz, P., Greenwood, P., Meroni, S., Troughton, J., Novak, P., Li, X., Watson, T., & Briscoe, J. (2019). Self-adhesive electrode applied to ZnO nanorod-based piezoelectric nanogenerators. Smart Materials and Structures
https://doi.org/10.1088/1361-665X/ab255b, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51380
Kerremans, R., Sandberg, O., Meroni, S., Watson, T., Armin, A., & Meredith, P. (2019). On the Electro‐Optics of Carbon Stack Perovskite Solar Cells. Solar RRL, 1900221
https://doi.org/10.1002/solr.201900221, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51379
Lin, C., De Rossi, F., Kim, J., Baker, J., Ngiam, J., Xu, B., Pont, S., Aristidou, N., Haque, S., Watson, T., McLachlan, M., & Durrant, J. (2019). Evidence for surface defect passivation as the origin of the remarkable photostability of unencapsulated perovskite solar cells employing aminovaleric acid as a processing additive. Journal of Materials Chemistry A, 7(7), 3006-3011.
https://doi.org/10.1039/C8TA11985F, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48968
Calado, P., Burkitt, D., Yao, J., Troughton, J., Watson, T., Carnie, M., Telford, A., O’Regan, B., Nelson, J., Barnes, P., & Carnie, M. (2019). Identifying Dominant Recombination Mechanisms in Perovskite Solar Cells by Measuring the Transient Ideality Factor. Physical Review Applied, 11(4)
https://doi.org/10.1103/PhysRevApplied.11.044005, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49970
McGettrick, J., Hooper, K., Pockett, A., Baker, J., Troughton, J., Carnie, M., & Watson, T. (2019). Sources of Pb(0) artefacts during XPS analysis of lead halide perovskites. Materials Letters
https://doi.org/10.1016/j.matlet.2019.04.081, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50176
Barbé, J., Hughes, D., Wei, Z., Pockett, A., Lee, H., Heasman, K., Carnie, M., Watson, T., & Tsoi, W. (2019). Radiation Hardness of Perovskite Solar Cells Based on Aluminum‐Doped Zinc Oxide Electrode Under Proton Irradiation. Solar RRL, 3(12)
https://doi.org/10.1002/solr.201900219, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51609
http://dx.doi.org/10.1002/solr.201900219
Burkitt, D., Swartwout, R., McGettrick, J., Greenwood, P., Beynon, D., Brenes, R., Bulović, V., & Watson, T. (2019). Acetonitrile based single step slot-die compatible perovskite ink for flexible photovoltaics. RSC Advances, 9(64), 37415-37423.
https://doi.org/10.1039/c9ra06631d, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52999
http://dx.doi.org/10.1039/c9ra06631d
Yates, H., Meroni, S., Raptis, D., Hodgkinson, J., & Watson, T. (2019). Flame assisted chemical vapour deposition NiO hole transport layers for mesoporous carbon perovskite cells. Journal of Materials Chemistry C, 7(42), 13235-13242.
https://doi.org/10.1039/c9tc03922h, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51378
http://dx.doi.org/10.1039/c9tc03922h
Burton, M., Mehraban, S., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). Earth abundant, non-toxic, 3D printed Cu2−xS with high thermoelectric figure of merit. Journal of Materials Chemistry A, 7(44), 25586-25592.
https://doi.org/10.1039/c9ta10064d, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52609
Chen, M., Liu, D., Li, W., Gurney, R., Li, D., Cai, J., Spooner, E., Kilbride, R., McGettrick, J., Watson, T., Li, Z., Jones, R., Lidzey, D., & Wang, T. (2019). Influences of Non-fullerene Acceptor Fluorination on Three-Dimensional Morphology and Photovoltaic Properties of Organic Solar Cells. ACS Applied Materials & Interfaces, 11(29), 26194-26203.
https://doi.org/10.1021/acsami.9b07317, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa51386
Mouhamad, Y., Meroni, S., De Rossi, F., Baker, J., Watson, T., Searle, J., & Jewell, E. (2019). Geometrical optimization for high efficiency carbon perovskite modules. Solar Energy, 187, 129-136.
https://doi.org/10.1016/j.solener.2019.05.047, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50504
Beynon, D., Burton, M., Mehraban, S., Beynon, D., McGettrick, J., Watson, T., Lavery, N., & Carnie, M. (2019). 3D Printed SnSe Thermoelectric Generators with High Figure of Merit. Advanced Energy Materials, 9(26)
https://doi.org/10.1002/aenm.201900201, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50643
Lakhiani, H., Dunlop, T., De Rossi, F., Dimitrov, S., Kerremans, R., Charbonneau, C., Watson, T., Barbe, J., & Tsoi, W. (2019). Variations of Infiltration and Electronic Contact in Mesoscopic Perovskite Solar Cells Revealed by High‐Resolution Multi‐Mapping Techniques. Advanced Functional Materials, 29(25)
https://doi.org/10.1002/adfm.201900885, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50132
Pockett, A., Raptis, D., Meroni, S., Baker, J., Watson, T., & Carnie, M. (2019). Origin of Exceptionally Slow Light Soaking Effect in Mesoporous Carbon Perovskite Solar Cells with AVA Additive. The Journal of Physical Chemistry C, 123(18), 11414-11421.
https://doi.org/10.1021/acs.jpcc.9b01058, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50063
Poli, I., Hintermair, U., Regue, M., Kumar, S., Sackville, E., Baker, J., Watson, T., Eslava, S., & Cameron, P. (2019). Graphite-protected CsPbBr3 perovskite photoanodes functionalised with water oxidation catalyst for oxygen evolution in water. Nature Communications, 10(1)
https://doi.org/10.1038/s41467-019-10124-0, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50291
http://dx.doi.org/10.1038/s41467-019-10124-0
Smith, B., Troughton, J., Lewis, A., McGettrick, J., Pockett, A., Carnie, M., Charbonneau, C., Pleydell-Pearce, C., Searle, J., Warren, P., Varma, S., & Watson, T. (2019). Mass Manufactured Glass Substrates Incorporating Prefabricated Electron Transport Layers for Perovskite Solar Cells. Advanced Materials Interfaces, 6(6)
https://doi.org/10.1002/admi.201801773, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48605
Lee, H., Barbé, J., Meroni, S., Du, T., Lin, C., Pockett, A., Troughton, J., Jain, S., Rossi, F., Baker, J., Carnie, M., McLachlan, M., Watson, T., Durrant, J., Tsoi, W., Baker, J., & Tsoi, W. (2019). Outstanding Indoor Performance of Perovskite Photovoltaic Cells - Effect of Device Architectures and Interlayers. Solar RRL, 3(1), 1800207
https://doi.org/10.1002/solr.201800207, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48884
Burkitt, D., Searle, J., Worsley, D., & Watson, T. (2018). Sequential Slot-Die Deposition of Perovskite Solar Cells Using Dimethylsulfoxide Lead Iodide Ink. Materials, 11(11), 2106
https://doi.org/10.3390/ma11112106, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa44925
Stoichkov, V., Bristow, N., Troughton, J., De Rossi, F., Watson, T., Kettle, J., & Watson, T. (2018). Outdoor performance monitoring of perovskite solar cell mini-modules: Diurnal performance, observance of reversible degradation and variation with climatic performance. Solar Energy, 170, 549-556.
https://doi.org/10.1016/j.solener.2018.05.086, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40653
Wei, Z., Fung, C., Pockett, A., Dunlop, T., McGettrick, J., Heard, P., Guy, O., Carnie, M., Sullivan, J., & Watson, T. (2018). Engineering of a Mo/SixNy Diffusion Barrier to Reduce the Formation of MoS2 in Cu2ZnSnS4 Thin Film Solar Cells. ACS Applied Energy Materials, 1(6), 2749-2757.
https://doi.org/10.1021/acsaem.8b00401, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40527
Burkitt, D., Searle, J., & Watson, T. (2018). Perovskite solar cells in N-I-P structure with four slot-die-coated layers. Royal Society Open Science, 5(5), 172158
https://doi.org/10.1098/rsos.172158, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa39416
Brennan, L., Purcell-Milton, F., McKenna, B., Watson, T., Gun'ko, Y., Evans, R., & Watson, T. (2018). Large area quantum dot luminescent solar concentrators for use with dye-sensitised solar cells. Journal of Materials Chemistry A, 6(6), 2671-2680.
https://doi.org/10.1039/C7TA04731B, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38072
Fuentes Pineda, R., Troughton, J., Planells, M., Sanchez-Molina Santos, I., Muhith, F., Nichol, G., Haque, S., Watson, T., & Robertson, N. (2018). Effect of alkyl chain length on the properties of triphenylamine-based hole transport materials and their performance in perovskite solar cells. Physical Chemistry Chemical Physics, 20(2), 1252-1260.
https://doi.org/10.1039/C7CP07682G, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37968
Meroni, S., Mouhamad, Y., De Rossi, F., Pockett, A., Baker, J., Escalante, R., Searle, J., Carnie, M., Jewell, E., Oskam, G., & Watson, T. (2018). Homogeneous and highly controlled deposition of low viscosity inks and application on fully printable perovskite solar cells. Science and Technology of Advanced Materials, 19(1), 1-9.
https://doi.org/10.1080/14686996.2017.1406777, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37650
https://www.tandfonline.com/doi/full/10.1080/14686996.2017.1406777
Beynon, D., Alberola-Borràs, J., Baker, J., De Rossi, F., Vidal, R., Beynon, D., Hooper, K., Watson, T., & Mora-Seró, I. (2018). Perovskite Photovoltaic Modules: Life Cycle Assessment of Pre-industrial Production Process. iScience, 9, 542-551.
https://doi.org/10.1016/j.isci.2018.10.020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa45939
Bliss, M., Smith, A., Betts, T., Baker, J., De Rossi, F., Bai, S., Watson, T., Snaith, H., & Gottschalg, R. (2018). Spectral Response Measurements of Perovskite Solar Cells. IEEE Journal of Photovoltaics, 1-7.
https://doi.org/10.1109/JPHOTOV.2018.2878003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa46105
Charles, R., Douglas, P., Baker, J., Carnie, M., Douglas, J., Penney, D., & Watson, T. (2018). Platinized counter-electrodes for dye-sensitised solar cells from waste thermocouples: A case study for resource efficiency, industrial symbiosis and circular economy. Journal of Cleaner Production, 202, 1167-1178.
https://doi.org/10.1016/j.jclepro.2018.08.125, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa43529
De Rossi, F., Baker, J., Beynon, D., Hooper, K., Meroni, S., Williams, D., Wei, Z., Yasin, A., Charbonneau, C., Jewell, E., & Watson, T. (2018). All Printable Perovskite Solar Modules with 198 cm2 Active Area and Over 6% Efficiency. Advanced Materials Technologies, 3(11)
https://doi.org/10.1002/admt.201800156, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40885
Poli, I., Baker, J., McGettrick, J., De Rossi, F., Eslava, S., Watson, T., & Cameron, P. (2018). Screen printed carbon CsPbBr3 solar cells with high open-circuit photovoltage. Journal of Materials Chemistry A, 6(38), 18677-18686.
https://doi.org/10.1039/C8TA07694D, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa44921
Burton, M., Liu, T., McGettrick, J., Mehraban, S., Baker, J., Pockett, A., Watson, T., Fenwick, O., & Carnie, M. (2018). Thin Film Tin Selenide (SnSe) Thermoelectric Generators Exhibiting Ultralow Thermal Conductivity. Advanced Materials, 30(31)
https://doi.org/10.1002/adma.201801357, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40905
Jain, S., Phuyal, D., Davies, M., Li, M., Philippe, B., De Castro, C., Qiu, Z., Kim, J., Watson, T., Tsoi, W., Karis, O., Rensmo, H., Boschloo, G., Edvinsson, T., & Durrant, J. (2018). An effective approach of vapour assisted morphological tailoring for reducing metal defect sites in lead-free, (CH3NH3)3Bi2I9 bismuth-based perovskite solar cells for improved performance and long-term stability. Nano Energy, 49, 614-624.
https://doi.org/10.1016/j.nanoen.2018.05.003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40033
Barnett, C., Jackson, G., Jones, D., Lewis, A., Welsby, K., Evans, J., McGettrick, J., Watson, T., Maffeis, T., Dunstan, P., Barron, A., & Cobley, R. (2018). Investigation into the effects of surface stripping ZnO nanosheets. Nanotechnology, 29(16), 165701
https://doi.org/10.1088/1361-6528/aaae5c, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38951
Subramaniam, M., Kumaresan, D., Jothi, S., McGettrick, J., & Watson, T. (2018). Reduced graphene oxide wrapped hierarchical TiO 2 nanorod composites for improved charge collection efficiency and carrier lifetime in dye sensitized solar cells. Applied Surface Science, 428, 439-447.
https://doi.org/10.1016/j.apsusc.2017.09.142, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35621
Lee, H., Telford, A., Röhr, J., Wyatt, M., Rice, B., Wu, J., Maciel, A., Tuladhar, S., Speller, E., McGettrick, J., Searle, J., Pont, S., Watson, T., Kirchartz, T., Durrant, J., Tsoi, W., Nelson, J., & Li, Z. (2018). The role of fullerenes in the environmental stability of polymer:fullerene solar cells. Energy & Environmental Science, 11(2), 417-428.
https://doi.org/10.1039/c7ee02983g, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38000
http://dx.doi.org/10.1039/c7ee02983g
Pering, S., Deng, W., Troughton, J., Kubiak, P., Ghosh, D., Niemann, R., Brivio, F., Jeffrey, F., Walker, A., Islam, M., Watson, T., Raithby, P., Johnson, A., Lewis, S., Cameron, P., & Watson, T. (2017). Azetidinium lead iodide for perovskite solar cells. J. Mater. Chem. A, 5(39), 20658-20665.
https://doi.org/10.1039/C7TA07545F, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35250
Bui, T., Goubard, F., Troughton, J., & Watson, T. (2017). Simple 3,6-bis(diphenylaminyl)carbazole molecular glasses as hole transporting materials for hybrid perovskite solar cells. Journal of Materials Science: Materials in Electronics
https://doi.org/10.1007/s10854-017-7691-y, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa35066
McKenna, B., Troughton, J., Watson, T., & Evans, R. (2017). Enhancing the stability of organolead halide perovskite films through polymer encapsulation. RSC Adv., 7(52), 32942-32951.
https://doi.org/10.1039/C7RA06002E, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34433
Hill, D., Holliman, P., McGettrick, J., Searle, J., Appelman, M., Chatterjee, P., Watson, T., & Worsley, D. (2017). Studies of inherent lubricity coatings for low surface roughness galvanised steel for automotive applications. Lubrication Science
https://doi.org/10.1002/ls.1370, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31547
McGettrick, J., Speller, E., Li, Z., Tsoi, W., Durrant, J., Watson, T., & Tsoi, W. (2017). Use of gas cluster ion source depth profiling to study the oxidation of fullerene thin films by XPS. Organic Electronics, 49, 85-93.
https://doi.org/10.1016/j.orgel.2017.06.022, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34259
Wheeler, S., Bryant, D., Troughton, J., Kirchartz, T., Watson, T., Nelson, J., & Durrant, J. (2017). Transient Optoelectronic Analysis of the Impact of Material Energetics and Recombination Kinetics on the Open-Circuit Voltage of Hybrid Perovskite Solar Cells. The Journal of Physical Chemistry C, 121(25), 13496-13506.
https://doi.org/10.1021/acs.jpcc.7b02411, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34264
Baker, J., Worsley, C., Lee, H., Clark, R., Tsoi, W., Williams, G., Worsley, D., Gethin, D., Watson, T., Baker, J., & Tsoi, W. (2017). Development of Graphene Nano-Platelet Ink for High Voltage Flexible Dye Sensitized Solar Cells with Cobalt Complex Electrolytes. Advanced Engineering Materials
https://doi.org/10.1002/adem.201600652, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31447
Baker, J., Mouhamad, Y., Hooper, K., Burkitt, D., Geoghegan, M., Watson, T., & Baker, J. (2017). From spin coating to roll-to-roll: investigating the challenge of upscaling lead halide perovskite solar cells. IET Renewable Power Generation, 11(5), 546-549.
https://doi.org/10.1049/iet-rpg.2016.0683, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31454
Speller, E., McGettrick, J., Rice, B., Telford, A., Lee, H., Tan, C., De Castro, C., Davies, M., Watson, T., Nelson, J., Durrant, J., Li, Z., Tsoi, W., & Tsoi, W. (2017). Impact of Aggregation on the Photochemistry of Fullerene Films: Correlating Stability to Triplet Exciton Kinetics. ACS Applied Materials & Interfaces, 9(27), 22739-22747.
https://doi.org/10.1021/acsami.7b03298, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34428
Hill, D., Holliman, P., McGettrick, J., Appelman, M., Chatterjee, P., Watson, T., & Worsley, D. (2017). Study of the tribological properties and ageing of alkyphosphonic acid films on galvanized steel. Tribology International
https://doi.org/10.1016/j.triboint.2017.11.015, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa36778
Sonar, P., Pham, H., Kazumasa Hayasaka, K., MATSUI, H., Tokito, S., Kim, J., Jain, S., Durrant, J., Tsoi, W., Watson, T., Motta, N., Do, T., Feron, K., Manzhos, S., & Tsoi, W. (2017). One Step Facile Synthesis of Novel Anthanthrone Dye Based, Dopant-Free Hole Transporting Material for Efficient and Stable Perovskite Solar Cells. Journal of Materials Chemistry C
https://doi.org/10.1039/C7TC05238C, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa37962
Orzech, M., Mazzali, F., McGettrick, J., Pleydell-Pearce, C., Watson, T., Voice, W., Jarvis, D., & Margadonna, S. (2017). Synergic effect of Bi, Sb and Te for the increased stability of bulk alloying anodes for sodium-ion batteries. Journal of Materials Chemistry A, 5(44), 23198-23208.
https://doi.org/10.1039/C7TA07648G, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa36243
Baker, J., Hooper, K., Meroni, S., Pockett, A., McGettrick, J., Wei, Z., Escalante, R., Oskam, G., Carnie, M., & Watson, T. (2017). High throughput fabrication of mesoporous carbon perovskite solar cells. Journal of Materials Chemistry A, 5(35), 18643-18650.
https://doi.org/10.1039/C7TA05674E, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34942
Troughton, J., Hooper, K., & Watson, T. (2017). Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules. Nano Energy, 39, 60-68.
https://doi.org/10.1016/j.nanoen.2017.06.039, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa34490
http://dx.doi.org/10.1016/j.nanoen.2017.06.039
Hooper, K., Lee, H., Newman, M., Meroni, S., Baker, J., Watson, T., & Tsoi, W. (2017). Probing the degradation and homogeneity of embedded perovskite semiconducting layers in photovoltaic devices by Raman spectroscopy. Physical Chemistry Chemical Physics, 19(7), 5246-5253.
https://doi.org/10.1039/c6cp05123e, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31892
Furnell, L., Holliman, P., Connell, A., Jones, E., Hobbs, R., Kershaw, C., Anthony, R., Searle, J., Watson, T., & McGettrick, J. (2017). Digital imaging to simultaneously study device lifetimes of multiple dye-sensitized solar cells. Sustainable Energy Fuels, 1(2), 362-370.
https://doi.org/10.1039/C7SE00015D, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31632
Cotella, G., Baker, J., Worsley, D., De Rossi, F., Pleydell-Pearce, C., Carnie, M., & Watson, T. (2017). One-step deposition by slot-die coating of mixed lead halide perovskite for photovoltaic applications. Solar Energy Materials and Solar Cells, 159, 362-369.
https://doi.org/10.1016/j.solmat.2016.09.013, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29891
Watson, T. (2016). Research Update: Behind the high efficiency of hybrid perovskite solar cells. APL Materials, 4(9), 091505
https://doi.org/10.1063/1.4962143, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29603
Wei, Z., Newman, M., Tsoi, W., Watson, T., & Tsoi, W. (2016). Raman mapping analysis for removal of surface secondary phases of CZTS films using chemical etching. Applied Physics Letters, 109(12), 123902
https://doi.org/10.1063/1.4963134, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29850
Wilderspin, T., De Rossi, F., & Watson, T. (2016). A simple method to evaluate the effectiveness of encapsulation materials for perovskite solar cells. Solar Energy, 139, 426-432.
https://doi.org/10.1016/j.solener.2016.09.038, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30239
Charbonneau, C., Cameron, P., Pockett, A., Lewis, A., Troughton, J., Jewell, E., Worsley, D., & Watson, T. (2016). Solution processing of TiO2 compact layers for 3rd generation photovoltaics. Ceramics International, 42(10), 11989-11997.
https://doi.org/10.1016/j.ceramint.2016.04.125, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa27850
Troughton, J., Carnie, M., Davies, M., Charbonneau, C., Jewell, E., Worsley, D., & Watson, T. (2016). Photonic flash-annealing of lead halide perovskite solar cells in 1 ms. J. Mater. Chem. A, 4(9), 3471-3476.
https://doi.org/10.1039/C5TA09431C, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26935
Yao, J., Kirchartz, T., Vezie, M., Faist, M., Gong, W., He, Z., Wu, H., Troughton, J., Watson, T., Bryant, D., & Nelson, J. (2015). Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells. Physical Review Applied, 4(1)
https://doi.org/10.1103/physrevapplied.4.014020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28845
http://dx.doi.org/10.1103/physrevapplied.4.014020
Troughton, J., Charbonneau, C., Carnie, M., Davies, M., Worsley, D., Watson, T., & Charbonneau, C. (2015). Rapid processing of perovskite solar cells in under 2.5 seconds. Journal of Materials Chemistry A, 3(17), 9123-9127.
https://doi.org/10.1039/c5ta00568j, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21252
Baker, J., McGettrick, J., Gethin, D., Watson, T., Gethin, D., Watson, T., McGettrick, J., & Baker, J. (2015). Impedance Characteristics of Transparent GNP-Pt Ink Catalysts for Flexible Dye Sensitized Solar Cells. Journal of the Electrochemical Society, 162(8), H564-H569.
https://doi.org/10.1149/2.0961508jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22358
Glover, C., McGettrick, J., Williams, G., Watson, T., Bryant, D., Williams, G., Watson, T., & McGettrick, J. (2015). A Scanning Kelvin Probe Investigation of the Interaction of PEDOT:PSS Films with Metal Surfaces and Potential Corrosion Protection Properties. Journal of The Electrochemical Society, 162(10), H799-H805.
https://doi.org/10.1149/2.0761510jes, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22932
Gomez, V., Bear, J., McNaughter, P., McGettrick, J., Watson, T., Charbonneau, C., O'Brien, P., Barron, A., & Dunnill, C. (2015). Bi-phasic titanium dioxide nanoparticles doped with nitrogen and neodymium for enhanced photocatalysis. Nanoscale, 7(42), 17735-17744.
https://doi.org/10.1039/c5nr06025g, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa26175
Bryant, D., Wheeler, S., O'Regan, B., Watson, T., Barnes, P., Worsley, D., & Durrant, J. (2015). Observable Hysteresis at Low Temperature in “Hysteresis Free” Organic–Inorganic Lead Halide Perovskite Solar Cells. The Journal of Physical Chemistry Letters, 6(16), 3190-3194.
https://doi.org/10.1021/acs.jpclett.5b01381, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23340
http://www.scopus.com/inward/record.url?eid=2-s2.0-84939814531&partnerID=MN8TOARS
Troughton, J., Bryant, D., Wojciechowski, K., Carnie, M., Snaith, H., Worsley, D., & Watson, T. (2015). Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates. J. Mater. Chem. A, 3(17), 9141-9145.
https://doi.org/10.1039/c5ta01755f, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21250
Charbonneau, C., Holliman, P., Davies, M., Watson, T., & Worsley, D. (2015). Facile self-assembly and stabilization of metal oxide nanoparticles. Journal of Colloid and Interface Science, 442, 110-119.
https://doi.org/10.1016/j.jcis.2014.11.042, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21103
Eperon, G., Bryant, D., Troughton, J., Stranks, S., Johnston, M., Watson, T., Worsley, D., & Snaith, H. (2015). Efficient, Semitransparent Neutral-Colored Solar Cells Based on Microstructured Formamidinium Lead Trihalide Perovskite. The Journal of Physical Chemistry Letters, 6(1), 129-138.
https://doi.org/10.1021/jz502367k, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21254
Williams, A., Holliman, P., Carnie, M., Davies, M., Worsley, D., & Watson, T. (2014). Perovskite Processing for Photovoltaics: a Spectro-Thermal Evaluation. Journal of Materials Chemistry A, 2(45), 19338-19346.
https://doi.org/10.1039/C4TA04725G, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18689
Bryant, D., Mabbett, I., Greenwood, P., Watson, T., Wijdekop, M., & Worsley, D. (2014). Ultrafast near-infrared curing of PEDOT:PSS. Organic Electronics, 15(6), 1126-1130.
https://doi.org/10.1016/j.orgel.2014.03.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18424
Baker, J., Deganello, D., Gethin, D., Watson, T., Gethin, D., Deganello, D., Watson, T., & Baker, J. (2014). Flexographic printing of graphene nanoplatelet ink to replace platinum as counter electrode catalyst in flexible dye sensitised solar cell. Materials Research Innovations, 18(2), 86-90.
https://doi.org/10.1179/1433075X14Y.0000000203, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18425
Watson, T., Coleman, A., Williams, G., McMurray, H., Williams, G., McMurray, H., & Watson, T. (2014). The effect of oxygen partial pressure on the filiform corrosion of organic coated iron. Corrosion Science
https://doi.org/10.1016/j.corsci.2014.08.004, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18426
Davies, M., Carnie, M., Holliman, P., Connell, A., Douglas, P., Watson, T., Charbonneau, C., Troughton, J., Worsley, D., Douglas, P., Worsley, D., Watson, T., Davies, M., Carnie, M., Charbonneau, C., & Holliman, P. (2014). Compositions, colours and efficiencies of organic–inorganic lead iodide/bromide perovskites for solar cells. Materials Research Innovations, 18(7), 482-485.
https://doi.org/10.1179/1433075X14Y.0000000252, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20855
Baker, J., Watson, T., Jones, D., Deganello, D., Gethin, D., Claypole, T., Worsley, D., & Watson, T. (2014). Optically transparent graphene nanoplatelet inks as low cost electrocatalysts for liquid dye sensitised solar cells. MRS Proceedings, 1667
https://doi.org/10.1557/opl.2014.684, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21081
Bryant, D., Greenwood, P., Troughton, J., Wijdekop, M., Carnie, M., Davies, M., Wojciechowski, K., Snaith, H., Watson, T., & Worsley, D. (2014). A Transparent Conductive Adhesive Laminate Electrode for High-Efficiency Organic-Inorganic Lead Halide Perovskite Solar Cells. Advanced Materials, 26(44), 7499-7504.
https://doi.org/10.1002/adma.201403939, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18688
Hooper, K., Carnie, M., Charbonneau, C., Watson, T., & Worsley, D. (2014). Near Infrared Radiation as a Rapid Heating Technique for TiO2Films on Glass Mounted Dye-Sensitized Solar Cells. International Journal of Photoenergy, 2014, 1-8.
https://doi.org/10.1155/2014/953623, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa21255
Carnie, M., Charbonneau, C., Davies, M., Regan, B., Worsley, D., & Watson, T. (2014). Performance enhancement of solution processed perovskite solar cells incorporating functionalized silica nanoparticles. J. Mater. Chem. A, 2(40), 17077-17084.
https://doi.org/10.1039/C4TA03387F, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18690
Davies, M., Watson, T., Holliman, P., Connell, A., & Worsley, D. (2014). In situ monitoring and optimization of room temperature ultra-fast sensitization for dye-sensitized solar cells. Chem. Commun., 50(83), 12512-12514.
https://doi.org/10.1039/C4CC05766J, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18691
Carnie, M., Charbonneau, C., Barnes, P., Davies, M., Mabbett, I., Watson, T., O'Regan, B., & Worsley, D. (2013). Ultra-fast sintered TiO2 films in dye-sensitized solar cells: phase variation, electron transport and recombination. Journal of Materials Chemistry A, 1(6), 2225-2230.
https://doi.org/10.1039/C2TA01005D, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13797
Carnie, M., Charbonneau, C., Davies, M., Mabbett, I., Watson, T., & Worsley, D. (2013). TiO2 Film Morphology, Electron Transport and Electron Lifetime in Ultra-fast Sintered Dye-sensitized Solar Cells. MRS Proceedings, 1493
https://doi.org/10.1557/opl.2012.1707, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14354
Charbonneau, C., Hooper, K., Carnie, M., Searle, J., Philip, B., Wragg, D., Watson, T., & Worsley, D. (2013). Rapid radiative platinisation for dye-sensitised solar cell counter electrodes. Progress in Photovoltaics: Research and Applications, n/a, n/a-n/a.
https://doi.org/10.1002/pip.2368, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14524
Carnie, M., Charbonneau, C., Davies, M., Troughton, J., Watson, T., Wojciechowski, K., Snaith, H., & Worsley, D. (2013). A one-step low temperature processing route for organolead halide perovskite solar cells. Chemical Communications, 49(72), 7893
https://doi.org/10.1039/c3cc44177f, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15675
Watson, T., Reynolds, G., Wragg, D., Williams, G., & Worsley, D. (2013). Corrosion Monitoring of Flexible Metallic Substrates for Dye-Sensitized Solar Cells. International Journal of Photoenergy, 2013, 1-8.
https://doi.org/10.1155/2013/791438, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15676
Bryant, D., Carnie, M., Watson, T., Worsley, D., & Watson, T. (2013). Electrochemical Analysis for the Realization of Low Temperature Processed ZnO Dye-Sensitized Solar Cells. ECS Transactions, 50(51), 11-21.
https://doi.org/10.1149/05051.0011ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15677
Mabbett, I., Geary, S., Warren, D., Sullivan, J., Penney, D., Watson, T., Worsley, D., Watson, T., & Mabbett, I. (2013). Near Infrared Heat Treatment to Flow Melt Tinplate. ECS Transactions, 50(37), 155-164.
https://doi.org/10.1149/05037.0155ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa15678
Carnie, M., Charbonneau, C., Davies, M., Mabbett, I., Watson, T., & Worsley, D. (2013). TiO2 Film Morphology, Electron Transport and Electron Lifetime in Ultra-fast Sintered Dye-sensitized Solar Cells. MRS Proceedings, 1493
https://doi.org/10.1557/opl.2012.1707, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18418
Vyas, N., Charbonneau, C., Carnie, M., Worsley, D., Watson, T., Worsley, D., Watson, T., & Charbonneau, C. (2013). An Inorganic/Organic Hybrid Coating for Low Cost Metal Mounted Dye-Sensitized Solar Cells. ECS Transactions, 53(24), 29-37.
https://doi.org/10.1149/05324.0029ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18419
Vyas, N., Wragg, D., Charbonneau, C., Carnie, M., Watson, T., Watson, T., & Charbonneau, C. (2013). Low Cost TCO Less Counter Electrodes for Dye-Sensitized Solar Cell Application. ECS Transactions, 53(24), 39-46.
https://doi.org/10.1149/05324.0039ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18421
Wragg, D., Watson, T., & Watson, T. (2013). Monitoring the Corrosion Inhibition of Nitrogen-Containing Heterocyclic Compounds in Dye Sensitized Solar Cells. ECS Transactions, 53(24), 19-28.
https://doi.org/10.1149/05324.0019ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18422
Wragg, D., Yliniemi, K., Watson, T., Worsley, D., Worsley, D., & Watson, T. (2013). Platinized Counter Electrodes for Dye Sensitized Solar Cells through the Redox Replacement of a Low Power Electrodeposited Lead Sacrificial Template. ECS Transactions, 53(24), 11-17.
https://doi.org/10.1149/05324.0011ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa18423
Worsley, D., Watson, T., & Carnie, M. (2012). UV Filtering of Dye-Sensitized Solar Cells: The Effects of Varying the UV Cut-Off upon Cell Performance and Incident Photon-to-Electron Conversion Efficiency. International Journal of Photoenergy, 2012
https://doi.org/10.1155/2012/506132, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa10556
Worsley, D., Watson, T., & Carnie, M. (2012). Photocatalytic Oxidation of Triiodide in UVA-Exposed Dye-Sensitized Solar Cells. International Journal of Photoenergy, 2012
https://doi.org/10.1155/2012/524590, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa10557
Watson, T., Charbonneau, C., Bryant, D., & Worsley, D. (2012). Acid Treatment of Titania Pastes to Create Scattering Layers in Dye-Sensitized Solar Cells. International Journal of Photoenergy, 2012, 1
https://doi.org/10.1155/2012/637839, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13322
Watson, T., Charbonneau, C., Carnie, M., Mabbett, I., Cherrington, M., & Worsley, D. (2012). Addressing Bottlenecks in Dye-sensitized Solar Cell Manufacture Using Rapid Near-infrared Heat Treatments. MRS Proceedings, 1447
https://doi.org/10.1557/opl.2012.1169, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13323
Carnie, M., Watson, T., & Worsley, D. (2012). Triiodide Photooxidation and Subsequent Regeneration in UVA Exposed Nano-Structured TiO2 Solar Cell Devices. MRS Proceedings, 1442
https://doi.org/10.1557/opl.2012.847, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13324
Watson, T., Reynolds, G., Worsley, D., & Watson, T. (2011). Painted steel mounted dye sensitised solar cells: titanium metallisation using magnetron sputtering. Ironmaking & Steelmaking, 38(3), 168-172.
https://doi.org/10.1179/1743281210Y.0000000003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13789
Carnie, M., Watson, T., Bryant, D., & Worsley, D. (2011). Electrochemical Characterization of the UV-Photodegradation of Dye-Sensitized Solar Cells and Usage in the Assessment of UV-Protection Measures. , 93-102.
https://doi.org/10.1149/1.3628613, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13791
Watson, T., Mabbett, I., Wang, H., Peter, L., & Worsley, D. (2011). Ultrafast near infrared sintering of TiO2 layers on metal substrates for dye-sensitized solar cells. Progress in Photovoltaics: Research and Applications, 19(4), 482-486.
https://doi.org/10.1002/pip.1041, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5827
Watson, T., Holliman, P., & Worsley, D. (2011). Rapid, continuous in situ monitoring of dye sensitisation in dye-sensitized solar cells. Journal of Materials Chemistry, 21(12), 4321-4325.
https://doi.org/10.1039/c0jm03607b, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5828
Cherrington, M., Claypole, T., Deganello, D., Mabbett, I., Watson, T., & Worsley, D. (2011). Ultrafast near-infrared sintering of a slot-die coated nano-silver conducting ink. Journal of Materials Chemistry, 21(21), 7562
https://doi.org/10.1039/c1jm10630a, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa12958
Holliman, P., Davies, M., Connell, A., Velasco, B., & Watson, T. (2010). Ultra-fast dye sensitisation and co-sensitisation for dye sensitized solar cells. Chemical Communications, 46(38), 7256-7258.
https://doi.org/10.1039/c0cc02619k, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13784
Arnold, J., Arnold, C., Alston, S., Watson, T., & Carnie, M. (2010). The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics. Polymer Testing
https://doi.org/10.1016/j.polymertesting.2010.02.006, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5448
Smith, K., El-Hiti, G., Matthews, I., Al-Shamali, M., & Watson, T. (2009). Rearrangement of Epoxides to Allylic Alcohols in the Presence of Reusable Basic Resins. Catalysis Letters, 128(1-2), 101-105.
https://doi.org/10.1007/s10562-008-9705-0, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13798
Worsley, D. & Watson, T. (2009). Enhanced Efficiency Dye Sensitized Solar Cells Through Acid Pre-treatment. MRS Proceedings
https://doi.org/10.1557/PROC-1211-R04-04, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5823
Worsley, D. & Watson, T. (2009). The Use of Near Infra Red as a Rapid Heat Treatment Process in the Manufacture of Metal-based Dye-sensitized Solar Cells. MRS Proceedings
https://doi.org/10.1557/PROC-1211-R08-06, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5824
Zhang, J., Mcgettrick, J., Ji, K., Bi, J., Webb, T., Liu, X., Liu, D., Ren, A., Xiang, Y., Li, B., Stolojan, V., Watson, T., Stranks, S., & Zhang, W. (n.d.) Fast and Balanced Charge Transport Enabled by Solution‐Processed Metal Oxide Layers for Efficient and Stable Inverted Perovskite Solar Cells. ENERGY & ENVIRONMENTAL MATERIALS
https://doi.org/10.1002/eem2.12595, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63219
http://dx.doi.org/10.1002/eem2.12595
Nguyen, K., Gluschke, J., Mostert, B., Nelson, A., Burwell, G., Lyttleton, R., Cavaye, H., Welbourn, R., Seidl, J., Lagier, M., Miranda, M., McGettrick, J., Watson, T., Meredith, P., & Micolich, A. (n.d.) The Effect of Direct Electron Beam Patterning on the Water Uptake and Ionic Conductivity of Nafion Thin Films. Advanced Electronic Materials, 9(8)
https://doi.org/10.1002/aelm.202300199, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63731
http://dx.doi.org/10.1002/aelm.202300199

Penodau Llyfrau

Meroni, S. & Watson, T. (2023). Manufacture, Modules, and Applications. Printable Mesoscopic Perovskite Solar Cells (pp. 237-268). Wiley
https://doi.org/10.1002/9783527834297.ch9, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64471
http://dx.doi.org/10.1002/9783527834297.ch9
Holliman, P., Connell, A., Davies, M., Carnie, M., Watson, T., & Watson, T. (2012). Rapid, low-temperature processing of dye-sensitized solar cells. Functional materials for sustainable energy applications (pp. 42-66). Woodhead publishing ltd
https://doi.org/10.1533/9780857096371.1.42, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13782
http://www.woodheadpublishing.com/en/book.aspx?bookID=2340

Cyfraniadau Cynadleddau

Wei, Z., Pockett, A., Mcgettrick, J., Fung, C., Guy, O., Carnie, M., & Watson, T. (2018). Temperature-light-dependent JV and TPV analysis of pure sulfide based Cu<inf>2</inf> ZnSnS<inf>4</inf> solar cells. In 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC) (pp. 2767-2770). IEEE.
https://doi.org/10.1109/pvsc.2018.8547605, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48393
http://dx.doi.org/10.1109/pvsc.2018.8547605
Carnie, M., Troughton, J., Regan, B., Barnes, P., Bryant, D., Watson, T., & Worsley, D. (2015). Identifying recombination mechanisms through materials development in perovskite solar cells. (pp. 1-3).
https://doi.org/10.1109/PVSC.2015.7355675, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa25496
Glover, C., Watson, T., Bryant, D., Williams, G., & Watson, T. (2014). A Scanning Kelvin Probe Investigation of the Interaction of PEDOT:PSS Films with Metal Surfaces and Potential Corrosion Protection Properties. In ECS Transactions (pp. 11-22).
https://doi.org/10.1149/06442.0011ecst, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23343
http://www.scopus.com/inward/record.url?eid=2-s2.0-84930353781&partnerID=MN8TOARS
Reynolds, G., Watson, T., Williams, G., & Worsley, D. (2011). Corrosion Resistance of Metallic Substrates for the Fabrication Dye-Sensitized Solar Cells. (pp. 129-138).
https://doi.org/10.1149/1.3553355, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13786
Watson, T., Mabbett, I., & Worsley, D. (2011). Ultrafast TiO2 Sintering of Metal Mounted Dye-sensitized Solar Cells. In ECS Transactions (pp. 151-158).
https://doi.org/10.1149/1.3553357, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa13787
Watson, T., McMurray, H., Williams, G., Coleman, A., Williams, G., McMurray, H., & Watson, T. (2004). The mechanism of chloride-induced filiform corrosion on iron investigated by time-lapse photomicrography. In Proceedings - Electrochemical Society (pp. 321-327). Corrosion and Corrosion Control in Saltwater Environments II.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23344
http://www.scopus.com/inward/record.url?eid=2-s2.0-28644448447&partnerID=MN8TOARS
Parvazian, E., Beynon, D., McGettrick, J., Patidar, R., Dunlop, T., Wei, Z., & Watson, T. (n.d.) Entirely Roll to Roll Carbon Electrode Printed Perovskite Solar Cells: Fabrication Pathway, challenges and Achievements. In International Conference on Hybrid and Organic Photovoltaics Proceedings of International Conference on Hybrid and Organic Photovoltaics (HOPV23)
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63396
https://www.nanoge.org/proceedings/HOPV23/63ea5d339b23d94247c9a323#/!
Watson, T., Beynon, D., & Parvazian, E. (n.d.) The route to continuous roll to roll manufacturing of flexible perovskite solar cells using a carbon electrode. In Proceedings of the MATSUS23 & Sustainable Technology Forum València (STECH23)FUNDACIO DE LA COMUNITAT VALENCIANA SCITO.
https://doi.org/10.29363/nanoge.matsus.2023.249, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63397
http://dx.doi.org/10.29363/nanoge.matsus.2023.249

Goruchwyliaeth

Untitled (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Untitled (cyfredol)

PhD

Goruchwyliwr arall: Prof Matthew Davies
Enhancing the Stability of Roll to Roll Manufactured Perovskite Solar Cells (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Manufacturing challenges in scaling of perovskite pv (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Characterisation of carbon contact perovskite solar cells in the frequency and time domains (cyfredol)

PhD

Goruchwyliwr arall: Prof Matt Carnie
Next-Generation Photovoltaics for IoT Devices (cyfredol)

PhD

Goruchwyliwr arall: Prof Matt Carnie
Slot die pre-metered coating process for organic coating of architectural steels (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
The Influence of the Manufacturing Environment on the Performance of Printed Perovskite Solar Cells (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Freshwater producing technologies for active buildings in developing countries (cyfredol)

PhD

Goruchwyliwr arall: Prof David Worsley
Feasibility of Perovskite Solar Cells for Space Applications (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Dr Wing Chung Tsoi
A Heterostructure Metal Oxide Based Photoanode for Photoelectrocatalytic Degradation of Water Pollutants and Hydrogen Generation (dyfarnwyd 2022)

PhD

Goruchwyliwr arall: Dr Moritz Kuehnel
Development and amelioration of green solvent systems for printed mesoscopic carbon perovskite solar cells (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
DEVELOPMENT OF ROLL-TO-ROLL SLOT DIE COATED PEROVSKITE SOLAR CELL (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Multispectral manufacturing: Making light work of steel processing (cyfredol)

PhD

Goruchwyliwr arall: Dr Eifion Jewell
Fabrication of printed perovskites on flexible substrates (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Opportunities for FTO/NSG TEC™ glass as a functional substrate in 3rd Generation PV (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Printing Perovskite on Steel (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Scalable full back-contacted roll-to-roll perovskite photovoltaic modules utilising a commercial 3D embossed substrate (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Printing solar cells for future technologies (cyfredol)

EngD

Goruchwyliwr arall: Dr Sarah-Jane Potts
Exploring alternative routes for the rapid fabrication of metal oxide thin films in application to the SteelCell (cyfredol)

EngD

Goruchwyliwr arall: Prof Matthew Davies
Scalable full backcontacted roll-to-roll perovskite photovoltaic modules utilising a commercial 3D embossed substrate (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Semi-transparent Organic Solar Cells (cyfredol)

EngD

Goruchwyliwr arall: Dr Wing Chung Tsoi
The development of surface treatments on galvanised steel products for the automotive industry utilising a chemcoater. (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Development of a solution processed top electrode for perovskite solar cells (cyfredol)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Semi-Transparent, Printable Organic Solar Cells for Energy-Generating Windows (dyfarnwyd 2024)

EngD

Goruchwyliwr arall: Dr Justin Searle
Perovskite Interlayers for Mass Manufacture Using Roll-to-Roll Compatible Deposition Methods (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Dr Eifion Jewell
Enabling Large Scale Manufacture and Processing of Perovskite Solar cells on Semiconducting Glass Substrates (dyfarnwyd 2022)

EngD

Goruchwyliwr arall: Dr Justin Searle
Exploring adaptations of the carbon layer of the triple mesoscopic carbon perovskite solar cell. (dyfarnwyd 2023)

MSc

Goruchwyliwr arall: Dr Eifion Jewell
Optimisation and Exploration of Inkjet Printing in Triple Mesoscopic Perovskite Cells (cyfredol)

MSc

Modiwlau a Addysgir

EG-183 Materials Resources

Materials resources are and always have been a controlling factor in economic and social human development. This course assumes no prior knowledge and explores the development of materials exploitation from the earliest times illustrating how the availability of resources and the ingenuity of humankind to exploit and extract new materials has allowed the evolution of our modern world. In historical terms, materials exploitation has always been related to economic growth or military needs. Increasingly, sources of energy and materials are sought which are both economically attractive and sustainable. As such, in each section of the course, aspects of sustainability and economics will be addressed, to show how and why certain materials choices are made for specific applications.
EG-279 Functional and Smart Materials

This module covers the underlying scientific principles behind the physical properties of functional and smart materials. It provides the basis for electrical conductivity, semiconductivity, superconductivity as well as optical, magnetic and thermal properties. The ways in which these properties can be utilised in a wide range of devices is explored. Module Aims: to introduce the scientific principles behind the physical properties of functional and smart materials and to explore the manufacture of functional devices.

Yr Athro Trystan Watson

Cyfeiriad ebost

Welsh language proficiency

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Penodau Llyfrau

Cyfraniadau Cynadleddau

Goruchwyliaeth

Untitled (cyfredol)

Untitled (cyfredol)

Enhancing the Stability of Roll to Roll Manufactured Perovskite Solar Cells (cyfredol)

Manufacturing challenges in scaling of perovskite pv (cyfredol)

Characterisation of carbon contact perovskite solar cells in the frequency and time domains (cyfredol)

Next-Generation Photovoltaics for IoT Devices (cyfredol)

Slot die pre-metered coating process for organic coating of architectural steels (cyfredol)

The Influence of the Manufacturing Environment on the Performance of Printed Perovskite Solar Cells (cyfredol)

Freshwater producing technologies for active buildings in developing countries (cyfredol)

Feasibility of Perovskite Solar Cells for Space Applications (dyfarnwyd 2023)

A Heterostructure Metal Oxide Based Photoanode for Photoelectrocatalytic Degradation of Water Pollutants and Hydrogen Generation (dyfarnwyd 2022)

Development and amelioration of green solvent systems for printed mesoscopic carbon perovskite solar cells (dyfarnwyd 2023)

DEVELOPMENT OF ROLL-TO-ROLL SLOT DIE COATED PEROVSKITE SOLAR CELL (dyfarnwyd 2023)

Multispectral manufacturing: Making light work of steel processing (cyfredol)

Fabrication of printed perovskites on flexible substrates (cyfredol)

Opportunities for FTO/NSG TEC™ glass as a functional substrate in 3rd Generation PV (cyfredol)

Printing Perovskite on Steel (cyfredol)

Scalable full back-contacted roll-to-roll perovskite photovoltaic modules utilising a commercial 3D embossed substrate (cyfredol)

Printing solar cells for future technologies (cyfredol)

Exploring alternative routes for the rapid fabrication of metal oxide thin films in application to the SteelCell (cyfredol)

Scalable full backcontacted roll-to-roll perovskite photovoltaic modules utilising a commercial 3D embossed substrate (cyfredol)

Semi-transparent Organic Solar Cells (cyfredol)

The development of surface treatments on galvanised steel products for the automotive industry utilising a chemcoater. (dyfarnwyd 2023)

Development of a solution processed top electrode for perovskite solar cells (cyfredol)

Semi-Transparent, Printable Organic Solar Cells for Energy-Generating Windows (dyfarnwyd 2024)

Perovskite Interlayers for Mass Manufacture Using Roll-to-Roll Compatible Deposition Methods (dyfarnwyd 2023)

Enabling Large Scale Manufacture and Processing of Perovskite Solar cells on Semiconducting Glass Substrates (dyfarnwyd 2022)

Exploring adaptations of the carbon layer of the triple mesoscopic carbon perovskite solar cell. (dyfarnwyd 2023)

Optimisation and Exploration of Inkjet Printing in Triple Mesoscopic Perovskite Cells (cyfredol)

Modiwlau a Addysgir

EG-183 Materials Resources

EG-279 Functional and Smart Materials