Dr Elizabeth Sackett

Uwch-ddarlithydd

Materials Science and Engineering

e.sackett@abertawe.ac.uk

Siaradwr Cymraeg Sylfaenol

Swyddfa Academaidd - A211
Ail lawr
Adeilad Dwyreinol Peirianneg
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0002-5975-6967

Trosolwg

Mae Dr Elizabeth Sackett yn ddarlithydd yn y Ganolfan Ymchwil Deunyddiau ym Mhrifysgol Abertawe, sy’n cydweithio'n agos â Tata Steel UK ar hyn o bryd ar wahanol agweddau ar feteleg dur a phrosesu. Mae ei phortffolio addysgu’n ymdrin â phynciau ar amrywiaeth eang o systemau metelig datblygedig.

Enillodd Elizabeth ei PhD mewn Gwyddoniaeth Deunydd a Pheirianneg ar ludded saib Ti685, a noddwyd gan Lu Awyr yr Unol Daleithiau. Mae ganddi dros 10 mlynedd o brofiad mewn ymchwil ôl-raddedig a masnachol ar ddetholiad eang o aloion a chyfansoddion ac mae wedi cyhoeddi mewn amrywiaeth o gyfnodolion rhyngwladol. Mae Elizabeth wedi cydweithio gyda mwy na 30 o gwmnïau rhyngwladol blaenllaw, gan gyfrannu at ddatblygu a goruchwylio prosiectau. Ar hyn o bryd, mae ffocws ei hymchwil yn archwilio priodweddau mecanyddol deunyddiau mewn perthynas â nanobantiad gan gynnwys straen gweddilliol a mapio straen. Elizabeth yw arweinydd Athena SWAN ar gyfer y Coleg Peirianneg, Prifysgol Abertawe.

Meysydd Arbenigedd

Lludded
Ymgripiad
Mesur straen
Straen gweddilliol
Nanobantiad

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Achintha, M., Nowell, D., Fufari, D., Sackett, E., Bache, M., Bache, M., & Sackett, E. (2013). Fatigue behaviour of geometric features subjected to laser shock peening: experiments and modelling. International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2013.04.016, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14798
Yousef, H., Cobley, R., Davies, H., James, D., Mehmood, S., Sackett, E., Sienz, J., Davies, H., Yousef, H., Cobley, R., & Sackett, E. (2015). Establishing a quantifiable tarnish timeline for comparison of anti-tarnish processes in metals. Materials and Corrosion, 66(10), 1120-1124.
https://doi.org/10.1002/maco.201407969, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20511
Salvo, D., Sackett, E., Johnston, R., Thompson, D., Andrews, P., & Bache, M. (2015). Mechanical characterisation of a fibre reinforced oxide/oxide ceramic matrix composite. Journal of the European Ceramic Society, 35(16), 4513-4520.
https://doi.org/10.1016/j.jeurceramsoc.2015.08.032, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23867
Lavery, N., Cherry, J., Mehmood, S., Davies, H., Girling, B., Sackett, E., Brown, S., & Sienz, J. (2017). Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion. Materials Science and Engineering: A, 693, 186-213.
https://doi.org/10.1016/j.msea.2017.03.100, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30238
O'Reilly, M., Pleydell-Pearce, C., Sackett, E., & Robinson, F. (2019). Evaluating the Suitability of Partial Recrystallization as a Strengthening Method for Thin-Gauge, High-Strength Non-Orientated Electrical Steel. IEEE Transactions on Magnetics, 55(2), 1-5.
https://doi.org/10.1109/TMAG.2018.2874518, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa45965
WHITESIDE, J., Vooys, A., Sackett, E., & McMurray, H. (2021). Influence of uniaxial deformation on surface morphology and corrosion performance of chromium-based coatings for packaging steel. Corrosion Science, 190, 109662
https://doi.org/10.1016/j.corsci.2021.109662, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57282
Germain, L., Sackett, E., & Bache, M. (2007). Inhomogeneous Strain Accumulation in a Model Near a Titanium Alloy. Proceedings of 11th World Conference on Titanium.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40103
SACKETT, E., GERMAIN, L., BACHE, M., & Sackett, E. (2007). Crystal plasticity, fatigue crack initiation and fatigue performance of advanced titanium alloys. International Journal of Fatigue, 29(9-11), 2015-2021.
https://doi.org/10.1016/j.ijfatigue.2006.12.011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40102
Sackett, E. & Bache, M. (2021). Novel Experimentation for the Validation of Mechanistic Models to Describe Cold Dwell Sensitivity in Titanium Alloys. Metals, 11(9), 1456
https://doi.org/10.3390/met11091456, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58002
Jestine, J., Johnston, R., Pleydell-Pearce, C., Tordoff, B., Sackett, E., Board, R., Thomas, N., & Joshy, K. (2022). Connected Microscopy to Characterise the Dermal Denticle of Raja clavata, the Thornback Ray
https://doi.org/10.1017/s1431927622005499, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63963
http://dx.doi.org/10.1017/s1431927622005499

Holl Ymchwil

Erthyglau Cylchgronau

Malla, A., Sullivan, J., Penney, D., Sackett, E., Lancaster, R., & Barker, P. (2024). The Effect of Germanium Additions on the Mechanical Properties of Zn-Mg-Al Alloys. Metals, 14(7), 820
https://doi.org/10.3390/met14070820, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa67176
Lancaster, R., Barnard, N., Haigh, B., Sackett, E., May, P., Britton, D., & Jeffs, S. (2023). Evaluating the Efficacy of Alternative Small Scale Test Methodologies in Deriving the Mechanical Properties of Additive Manufactured Materials. Journal of Materials Research and Technology, 26, 9328-9345.
https://doi.org/10.1016/j.jmrt.2023.09.224, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64595
http://dx.doi.org/10.1016/j.jmrt.2023.09.224
Sackett, E. & Bache, M. (2021). Novel Experimentation for the Validation of Mechanistic Models to Describe Cold Dwell Sensitivity in Titanium Alloys. Metals, 11(9), 1456
https://doi.org/10.3390/met11091456, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58002
WHITESIDE, J., Vooys, A., Sackett, E., & McMurray, H. (2021). Influence of uniaxial deformation on surface morphology and corrosion performance of chromium-based coatings for packaging steel. Corrosion Science, 190, 109662
https://doi.org/10.1016/j.corsci.2021.109662, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57282
O'Reilly, M., Pleydell-Pearce, C., Sackett, E., & Robinson, F. (2019). Evaluating the Suitability of Partial Recrystallization as a Strengthening Method for Thin-Gauge, High-Strength Non-Orientated Electrical Steel. IEEE Transactions on Magnetics, 55(2), 1-5.
https://doi.org/10.1109/TMAG.2018.2874518, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa45965
Lavery, N., Cherry, J., Mehmood, S., Davies, H., Girling, B., Sackett, E., Brown, S., & Sienz, J. (2017). Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion. Materials Science and Engineering: A, 693, 186-213.
https://doi.org/10.1016/j.msea.2017.03.100, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa30238
Yousef, H., Cobley, R., Davies, H., James, D., Mehmood, S., Sackett, E., Sienz, J., Davies, H., Yousef, H., Cobley, R., & Sackett, E. (2015). Establishing a quantifiable tarnish timeline for comparison of anti-tarnish processes in metals. Materials and Corrosion, 66(10), 1120-1124.
https://doi.org/10.1002/maco.201407969, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20511
Salvo, D., Sackett, E., Johnston, R., Thompson, D., Andrews, P., & Bache, M. (2015). Mechanical characterisation of a fibre reinforced oxide/oxide ceramic matrix composite. Journal of the European Ceramic Society, 35(16), 4513-4520.
https://doi.org/10.1016/j.jeurceramsoc.2015.08.032, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa23867
Achintha, M., Nowell, D., Fufari, D., Sackett, E., Bache, M., Bache, M., & Sackett, E. (2013). Fatigue behaviour of geometric features subjected to laser shock peening: experiments and modelling. International Journal of Fatigue
https://doi.org/10.1016/j.ijfatigue.2013.04.016, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14798
SACKETT, E., GERMAIN, L., BACHE, M., & Sackett, E. (2007). Crystal plasticity, fatigue crack initiation and fatigue performance of advanced titanium alloys. International Journal of Fatigue, 29(9-11), 2015-2021.
https://doi.org/10.1016/j.ijfatigue.2006.12.011, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40102

Cyfraniadau Cynadleddau

Germain, L., Sackett, E., & Bache, M. (2007). Inhomogeneous Strain Accumulation in a Model Near a Titanium Alloy. Proceedings of 11th World Conference on Titanium.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40103

Cynnyrch Ymchwil Arall

Jestine, J., Johnston, R., Pleydell-Pearce, C., Tordoff, B., Sackett, E., Board, R., Thomas, N., & Joshy, K. (2022). Connected Microscopy to Characterise the Dermal Denticle of Raja clavata, the Thornback Ray
https://doi.org/10.1017/s1431927622005499, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63963
http://dx.doi.org/10.1017/s1431927622005499
Johnston, R., Said, M., Labonte, D., Russell, J., Sackett, E., & Board, R. (2022). Correlative Structure-Property Characterisation of the Leafcutter Ant (Atta cepholotes) Mandible
https://doi.org/10.1017/s1431927622005505, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa63966
http://dx.doi.org/10.1017/s1431927622005505

Goruchwyliaeth

Untitled (cyfredol)

PhD

Goruchwyliwr arall: Prof Robert Lancaster
Mechanical testing of aerospace alloys for hydrogen gas turbines (cyfredol)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
Integrating Nanomechanical Property Testing into a Correlative Imaging Workflow (dyfarnwyd 2023)

PhD

Goruchwyliwr arall: Prof Richard Johnston
Coating Network and Barrier Property Design Strategies for Protection Against Hydrogen Embrittlement«br /»«br /» (cyfredol)

EngD

Goruchwyliwr arall: Dr Shirin Alexander
Understanding Scale Growth on Carbon Steel Tubes during High Temperature Processing (cyfredol)

EngD

Goruchwyliwr arall: Prof Cinzia Giannetti
Susceptibility of pipeline steel to hydrogen induced failure (cyfredol)

EngD

Goruchwyliwr arall: Prof Geraint Williams
New generation insulation material for use within the building envelope (cyfredol)

EngD

Goruchwyliwr arall: Prof Peter Holliman
Improving the Formability of Automated Steel Grades Using Rapid Alloy Prototyping (cyfredol)

EngD

Goruchwyliwr arall: Dr Hollie Cockings
Oxidation of a Dual Phase Steel During Rapid Alloy Prototyping (cyfredol)

EngD

Goruchwyliwr arall: Prof Richard Johnston
An investigation into the combustion efficiency of the blast furnace (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Dr Hollie Cockings
Ultra-High Strength Steels for Roll Formed Automotive Body in White Applications (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Prof Cameron Pleydell-Pearce
Hydrogen Embrittlement of Automotive Ultra High Strength Steels – Mechanism and Minimisation (dyfarnwyd 2022)

EngD

Goruchwyliwr arall: Prof Geraint Williams
Mechanical Properties of Vintage Seam-Welded Pipe (cyfredol)

MSc

Goruchwyliwr arall: Prof Helen Davies
Investigation into applications of Niobium steel grades for use in packaging materials (cyfredol)

MSc

Goruchwyliwr arall: Prof Cameron Pleydell-Pearce
The Effect of Discolouration in Cobalt Alloy Welding Rods on the Mechanical behaviour of the Welded Joints (cyfredol)

MSc

Goruchwyliwr arall: Dr Amit Das
Optimisation of High Yield Steel Coil Processing Characteristics (dyfarnwyd 2023)

MSc

Goruchwyliwr arall: Dr Mark Coleman

Modiwlau a Addysgir

EG-286 Materials Practicals 2a: Microstructure Development in Alloy Systems

This module is concerned with the microscopic examination, measurement and interpretation of the microstructures of metals. This involves the development skills in the microstructural characterisation of metals and the development of sound microstructural measurement methodologies. This is then reinforced by logical reasoning based on an understanding of binary phase diagrams of the nature of the phase transformations occurring in metals and of the influence of processing on microstructure. This module also details the mathematical descriptions necessary for the solution of a variety of critical engineering problems, with an emphasis on materials processing.
EG-392 Physical Metallurgy of Steels

This module will provide you with comprehensive theoretical understanding of the uses of ferrous alloys which will be of critical value in the design and implementation of your research project and in the appreciation of value added products. It is also the case that you will have a greater awareness of the potential for multi-material design solutions.
EGTM92 Physical Metallurgy of Steels

This module will provide you with comprehensive theoretical understanding of the uses of ferrous alloys which will be of critical value in the design and implementation of your research project and in the appreciation of value added products. It is also the case that you will have a greater awareness of the potential for multi-material design solutions.

Dr Elizabeth Sackett

Cyfeiriad ebost

Welsh language proficiency

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Cyfraniadau Cynadleddau

Cynnyrch Ymchwil Arall

Goruchwyliaeth

Untitled (cyfredol)

Mechanical testing of aerospace alloys for hydrogen gas turbines (cyfredol)

Integrating Nanomechanical Property Testing into a Correlative Imaging Workflow (dyfarnwyd 2023)

Coating Network and Barrier Property Design Strategies for Protection Against Hydrogen Embrittlement«br /»«br /» (cyfredol)

Understanding Scale Growth on Carbon Steel Tubes during High Temperature Processing (cyfredol)

Susceptibility of pipeline steel to hydrogen induced failure (cyfredol)

New generation insulation material for use within the building envelope (cyfredol)

Improving the Formability of Automated Steel Grades Using Rapid Alloy Prototyping (cyfredol)

Oxidation of a Dual Phase Steel During Rapid Alloy Prototyping (cyfredol)

An investigation into the combustion efficiency of the blast furnace (dyfarnwyd 2023)

Ultra-High Strength Steels for Roll Formed Automotive Body in White Applications (dyfarnwyd 2023)

Hydrogen Embrittlement of Automotive Ultra High Strength Steels – Mechanism and Minimisation (dyfarnwyd 2022)

Mechanical Properties of Vintage Seam-Welded Pipe (cyfredol)

Investigation into applications of Niobium steel grades for use in packaging materials (cyfredol)

The Effect of Discolouration in Cobalt Alloy Welding Rods on the Mechanical behaviour of the Welded Joints (cyfredol)

Optimisation of High Yield Steel Coil Processing Characteristics (dyfarnwyd 2023)

Modiwlau a Addysgir

EG-286 Materials Practicals 2a: Microstructure Development in Alloy Systems

EG-392 Physical Metallurgy of Steels

EGTM92 Physical Metallurgy of Steels