Yr Athro Robert Lancaster

Athro

Materials Science and Engineering

+44 (0) 1792 295965

r.j.lancaster@abertawe.ac.uk

Siaradwr Cymraeg Sylfaenol

Swyddfa Weinyddol - 015
Llawr Gwaelod
Y Sefydliad Deunyddiau Strwythurol
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0002-1365-6944

Trosolwg

Mae gan yr Athro Robert Lancaster Gadair mewn Gwyddor Deunyddiau o fewn y Sefydliad Deunyddiau Strwythurol (ISM) ym Mhrifysgol Abertawe, ac ar hyn o bryd mae’n arwain tîm o 10 ymchwilydd sy'n canolbwyntio ar dechnolegau adiol lludded thermo-fecanyddol (TMF) a phrofion tyllwr bach (SPT). Mae cyfanswm ei bortffolio grant presennol yn werth dros £2.25m ar brosiectau wedi’u hariannu+ gan EPSRC, Horizon 2020, Clean Skies 2, Innovate UK, ATI, NRN ac M2A, mewn cydweithrediad â nifer o sefydliadau a chwmnïau ymchwil blaenllaw gan gynnwys Rolls-Royce plc., Rolls-Royce Nuclear Submarines, GKN Aerospace/Additive, NDT TWI Validation Centre, Cummins Turbo Technologies a Phrifysgol Sheffield. Mae'r prosiectau cydweithredol hyn wedi canolbwyntio'n bennaf ar berfformiad mecanyddol a chyfanrwydd strwythurol deunyddiau a weithgynhyrchwyd drwy ddulliau adiol, a gweithredu'r methodolegau perthnasol sy'n gallu efelychu gwir amodau mewn gwasanaeth.

Mae'r Athro Lancaster yn arloeswr yn y defnydd o fethodolegau SPT a'u cymhwyso i strwythurau adiol ac mae wedi datblygu gallu profi lludded SP unigryw sydd heb ei ail yn y byd. Mae wedi cael ei gydnabod yn swyddogol fel arbenigwr cenedlaethol y DU ar SPT, mae'n aelod o fwrdd Pwyllgor Profi Uniaxial BSi ISE 101/01, yn Ysgrifennydd y Pwyllgor Strwythur a Phriodweddau Deunyddiau IOM3 a'r Pwyllgor Peirianneg Gronynnau IOM3. Mae wedi cyhoeddi dros 60 o erthyglau cyfnodolyn a chynhadledd, pennod llyfr drwy wahoddiad ar ymgripiad SP ac wedi bod yn olygydd gwadd ar ddau rifyn arbennig o'r cyfnodolyn Materials, gan ganolbwyntio ar SPT a phriodweddau mecanyddol strwythurau adiol. Arweiniodd hyn at yr Athro Lancaster yn cadeirio 5ed Gynhadledd Ryngwladol Technegau Prawf Sampl Bach (SSTT2018) yn Abertawe ym mis Gorffennaf 2018. Mae'r gyfres hon o gynadleddau sy’n cael eu cynnal bob dwy flynedd yn darparu'r prif lwyfan ar gyfer lledaenu ymchwil ar dechnolegau profi ar raddfa fach gyda chynhadledd 2018 ac yn denu dros 80 o gynrychiolwyr o 15 o wledydd a thros 50 o bapurau wedi'u cyhoeddi yn nhrafodion y gynhadledd, gyda’r Athro Lancaster yn gweithredu fel y Prif Olygydd. Ar ben hyn, bu’n olygydd gwadd i rifyn arbennig o’r cyfnodolyn Theoretical & Applied Fracture Mechanics a adroddodd ar rai o'r datblygiadau diweddar a gafodd eu cyflwyno yn y gynhadledd.

Meysydd Arbenigedd

Profion ar ffurfiau bychain
Prosesau Gweithgynhyrchu Haenau Adiol (ALM)
Uwchaloion Nicel (grisialau sengl, amlgrisialog)
Lludded Thermo-fecanyddol
Bywyd Lludded
Dadansoddi Methiant
Gwerthusiad Nad yw'n Ddinistriol
Aloion Titaniwm

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Lancaster, R., Jeffs, S., Haigh, B., & Barnard, N. (2022). Derivation of material properties using small punch and shear punch test methods. Materials & Design, 215, 110473
https://doi.org/10.1016/j.matdes.2022.110473, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59463
Davies, S., Jeffs, S., Coleman, M., & Lancaster, R. (2018). Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy. Materials & Design, 159, 39-46.
https://doi.org/10.1016/j.matdes.2018.08.039, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa43528
Whittaker, M., Evans, W., Lancaster, R., Harrison, W., Webster, P., Whittaker, M., Harrison, W., & Lancaster, R. (2009). The effect of microstructure and texture on mechanical properties of Ti6-4. International Journal of Fatigue, 31(11-12), 2022-2030.
https://doi.org/10.1016/j.ijfatigue.2009.02.014, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5830
Evans, W., Lancaster, R., Steele, A., Whittaker, M., Jones, N., Whittaker, M., & Lancaster, R. (2009). Plain and notched fatigue in nickel single crystal alloys. International Journal of Fatigue, 31(11-12), 1709-1718.
https://doi.org/10.1016/j.ijfatigue.2009.03.010, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5832
Johnston, R., Bache, M., Amos, M., Liaptsis, D., Lancaster, R., Lewis, R., Andrews, P., & Edmonds, I. (2012). Investigation of Non-Destructive Evaluation Methods Applied to Oxide/Oxide Fiber Reinforced Ceramic Matrix Composite. Mechanical Properties and Performance of Engineering Ceramics and Composites VII (pp. 57-67). American Ceramic Society
https://doi.org/10.1002/9781118217467.ch6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14302
Lancaster, R., Whittaker, M., Williams, S., Whittaker, M., & Lancaster, R. (2013). A review of thermo-mechanical fatigue behaviour in polycrystalline nickel superalloys for turbine disc applications. Materials at High Temperatures, 30(1), 2-12.
https://doi.org/10.3184/096034013x13630238172260, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14477
Harrison, W., Whittaker, M., Lancaster, R., Whittaker, M., Harrison, W., & Lancaster, R. (2013). A model for time dependent strain accumulation and damage at low temperatures in Ti–6Al–4V. Materials Science and Engineering: A, 574, 130-136.
https://doi.org/10.1016/j.msea.2013.02.070, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14559
Whittaker, M., Harrison, W., Lancaster, R., Williams, S., Whittaker, M., Harrison, W., & Lancaster, R. (2013). An analysis of modern creep lifing methodologies in the titanium alloy Ti6-4. Materials Science and Engineering: A, 577, 114-119.
https://doi.org/10.1016/j.msea.2013.03.030, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14565
Jones, J., Whittaker, M., Lancaster, R., & Williams, S. (2017). The influence of phase angle, strain range and peak cycle temperature on the TMF crack initiation behaviour and damage mechanisms of the nickel-based superalloy, RR1000. International Journal of Fatigue, 98, 279-285.
https://doi.org/10.1016/j.ijfatigue.2017.01.036, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31841
Holmström, S., Li, Y., Dymacek, P., Vacchieri, E., Jeffs, S., Lancaster, R., Omacht, D., Kubon, Z., Anelli, E., Rantala, J., Tonti, A., Komazaki, S., Naveena, ., Bruchhausen, M., Hurst, R., Hähner, P., Richardson, M., & Andres, D. (2018). Creep strength and minimum strain rate estimation from Small Punch Creep tests. Materials Science and Engineering: A, 731, 161-172.
https://doi.org/10.1016/j.msea.2018.06.005, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40645

Holl Ymchwil

Erthyglau Cylchgronau

Malla, A., Sullivan, J., Penney, D., Sackett, E., Lancaster, R., & Barker, P. (2024). The Effect of Germanium Additions on the Mechanical Properties of Zn-Mg-Al Alloys. Metals, 14(7), 820
https://doi.org/10.3390/met14070820, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa67176
Ednie, L., Antonysamy, A., Parimi, L., Mani, M., Thomas, M., & Lancaster, R. (2024). Understanding the fatigue behaviour of Ti–6Al–4V manufactured via various additive processes. Journal of Materials Research and Technology, 31, 1337-1354.
https://doi.org/10.1016/j.jmrt.2024.06.168, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66898
http://dx.doi.org/10.1016/j.jmrt.2024.06.168
Douglas, R., Barnard, N., Lavery, N., Sullivan, J., Jones, T., & Lancaster, R. (2024). The effect of powder recycling on the mechanical performance of laser powder bed fused stainless steel 316L. Additive Manufacturing, 88, 104245
https://doi.org/10.1016/j.addma.2024.104245, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa66598
DOUGLAS, R., Beard, W., Barnard, N., Lee, S., Shao, S., Shamsaei, N., Jones, T., & Lancaster, R. (2024). The influence of energy density on the low cycle fatigue behaviour of laser powder bed fused stainless steel 316L. International Journal of Fatigue, 181, 108123
https://doi.org/10.1016/j.ijfatigue.2023.108123, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65414
Lancaster, R., Barnard, N., Haigh, B., Sackett, E., May, P., Britton, D., & Jeffs, S. (2023). Evaluating the Efficacy of Alternative Small Scale Test Methodologies in Deriving the Mechanical Properties of Additive Manufactured Materials. Journal of Materials Research and Technology, 26, 9328-9345.
https://doi.org/10.1016/j.jmrt.2023.09.224, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64595
http://dx.doi.org/10.1016/j.jmrt.2023.09.224
González, S., Sfikas, A., Kamnis, S., John, S., Barnard, N., Gammer, C., Eckert, J., Garay-Reyes, C., Martínez-Sánchez, R., Naung, S., Rahmati, M., Keil, T., Durst, K., & Lancaster, R. (2023). Investigation of the strain rate sensitivity of CoCrFeMnNiTix (x=0, 0.3) high-entropy alloys using the shear punch test. Materials and Design, 233, 112294
https://doi.org/10.1016/j.matdes.2023.112294, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa64443
http://dx.doi.org/10.1016/j.matdes.2023.112294
González, S., Sfikas, A., Kamnis, S., John, S., Nye, Z., Spink, M., Allen, C., Martínez-Sánchez, R., Naung, S., Rahmati, M., Keil, T., Durst, K., & Lancaster, R. (2023). Computational and experimental investigation of the strain rate sensitivity of small punch testing of the high-entropy alloy CoCrFeMnNi. Journal of Alloys and Compounds, 936, 168219
https://doi.org/10.1016/j.jallcom.2022.168219, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa62090
Beard, W., Lancaster, R., Barnard, N., Jones, T., & Adams, J. (2023). The influence of surface finish and build orientation on the low cycle fatigue behaviour of laser powder bed fused stainless steel 316L. Materials Science and Engineering: A, 864, 144593
https://doi.org/10.1016/j.msea.2023.144593, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa62265
Ednie, L., Lancaster, R., Antonysamy, A., Zelenka, F., Scarpellini, A., Parimi, L., Maddalena, R., Barnard, N., & Efthymiadis, P. (2022). The effects of surface finish on the fatigue performance of electron beam melted Ti–6Al–4V. Materials Science and Engineering: A, 857, 144050
https://doi.org/10.1016/j.msea.2022.144050, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa61280
Grech, I., Sullivan, J., Lancaster, R., Plummer, J., & Lavery, N. (2022). The optimisation of hot isostatic pressing treatments for enhanced mechanical and corrosion performance of stainless steel 316L produced by laser powder bed fusion. Additive Manufacturing, 58, 103072
https://doi.org/10.1016/j.addma.2022.103072, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60813
Douglas, R., Lancaster, R., Jones, T., Barnard, N., & Adams, J. (2022). The Influence of Powder Reuse on the Properties of Laser Powder Bed‐Fused Stainless Steel 316L: A Review. Advanced Engineering Materials, 24(9), 2200596
https://doi.org/10.1002/adem.202200596, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60436
http://dx.doi.org/10.1002/adem.202200596
D’Souza, N., Ravichandran, S., Donovan, S., Daum, P., Morrell, R., Nye, Z., & Lancaster, R. (2022). On the Design Optimisation of Direct Energy Deposited Support Structures to Repair Aero-Engine Turbine Segments. Additive Manufacturing, 56, 102905
https://doi.org/10.1016/j.addma.2022.102905, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60088
Jeffs, S., Douglas, R., Beard, W., Coleman, M., Adams, J., Jones, T., Poole, D., & Lancaster, R. (2022). Characterising the high temperature tensile behaviour of laser powder bed fused duplex stainless steel 2205 using the small punch test. Materials Characterization, 189, 111953
https://doi.org/10.1016/j.matchar.2022.111953, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60040
Lancaster, R., Jeffs, S., Haigh, B., & Barnard, N. (2022). Derivation of material properties using small punch and shear punch test methods. Materials & Design, 215, 110473
https://doi.org/10.1016/j.matdes.2022.110473, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa59463
Gray, V., Jones, P., Whittaker, M., Lancaster, R., Pretty, C., & Williams, S. (2022). A holistic approach to Thermo-Mechanical Fatigue phase angle effects for an aerospace nickel superalloy. International Journal of Fatigue, 156, 106631
https://doi.org/10.1016/j.ijfatigue.2021.106631, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa58649
Jeffs, S., Lancaster, R., Davies, G., Hole, W., Roberts, B., Stapleton, D., Thomas, M., Todd, I., & Baxter, G. (2021). Effect of Process Parameters and Build Orientation on Microstructure and Impact Energy of Electron Beam Powder Bed Fused Ti-6Al-4V. Materials, 14(18), 5376
https://doi.org/10.3390/ma14185376, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa57908
Boswell, J., Jones, J., Barnard, N., Clark, D., Whittaker, M., & Lancaster, R. (2021). The effects of energy density and heat treatment on the microstructure and mechanical properties of laser additive manufactured Haynes 282. Materials & Design, 205, 109725
https://doi.org/10.1016/j.matdes.2021.109725, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56697
Sampson, R., Lancaster, R., Sutcliffe, M., Carswell, D., Hauser, C., & Barras, J. (2021). The influence of key process parameters on melt pool geometry in direct energy deposition additive manufacturing systems. Optics & Laser Technology, 134, 106609
https://doi.org/10.1016/j.optlastec.2020.106609, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55172
Lancaster, R., Davies, S., Jeffs, S., Lewis, D., & Coleman, M. (2021). The effects of thermal exposure on the high temperature behaviour of a Laser Powder Bed Fused nickel based superalloy C263. Materials Science and Engineering: A, 801, 140409
https://doi.org/10.1016/j.msea.2020.140409, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55449
Stekovic, S., Jones, P., Engel, B., Whittaker, M., Norman, V., Rouse, J., Pattison, S., Hyde, C., Härnman, P., Lancaster, R., Leidermark, D., & Moverare, J. (2020). DevTMF – Towards code of practice for thermo-mechanical fatigue crack growth. International Journal of Fatigue, 138, 105675
https://doi.org/10.1016/j.ijfatigue.2020.105675, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54215
Engel, B., Rouse, J., Hyde, C., Lavie, W., Leidermark, D., Stekovic, S., Williams, S., Pattison, S., Grant, B., Whittaker, M., Jones, P., Lancaster, R., & Li, H. (2020). The prediction of crack propagation in coarse grain RR1000 using a unified modelling approach. International Journal of Fatigue, 105652
https://doi.org/10.1016/j.ijfatigue.2020.105652, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54025
Sampson, R., Lancaster, R., Sutcliffe, M., Carswell, D., Hauser, C., & Barras, J. (2020). An improved methodology of melt pool monitoring of direct energy deposition processes. Optics & Laser Technology, 127, 106194
https://doi.org/10.1016/j.optlastec.2020.106194, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53716
Jones, J., Whittaker, M., Lancaster, R., Hyde, C., Rouse, J., Engel, B., Pattison, S., Stekovic, S., Jackson, C., & Li, H. (2020). The effect of phase angle on crack growth mechanisms under thermo-mechanical fatigue loading. International Journal of Fatigue, 135, 105539
https://doi.org/10.1016/j.ijfatigue.2020.105539, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa53617
Hilal, H., Lancaster, R., Jeffs, S., Boswell, J., Stapleton, D., & Baxter, G. (2019). The Influence of Process Parameters and Build Orientation on the Creep Behaviour of a Laser Powder Bed Fused Ni-based Superalloy for Aerospace Applications. Materials, 12(9), 1390
https://doi.org/10.3390/ma12091390, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa50161
Smith, R., Lancaster, R., Jones, J., & Mason-Flucke, J. (2019). Lifing the Effects of Crystallographic Orientation on the Thermo-Mechanical Fatigue Behaviour of a Single-Crystal Superalloy. Materials, 12(6), 998
https://doi.org/10.3390/ma12060998, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49697
Hilal, H., Lancaster, R., Stapleton, D., & Baxter, G. (2019). Investigating the Influence of Process Parameters on the Structural Integrity of an Additively Manufactured Nickel-Based Superalloy. Metals, 9(11), 1191
https://doi.org/10.3390/met9111191, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa52638
Palmer, J., Jones, J., Dyer, A., Smith, R., Lancaster, R., Whittaker, M., Whittaker, M., & Lancaster, R. (2019). Development of test facilities for thermo-mechanical fatigue testing. International Journal of Fatigue, 121, 208-218.
https://doi.org/10.1016/j.ijfatigue.2018.12.015, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48058
Lewis, D., Lancaster, R., Jeffs, S., Illsley, H., Davies, S., & Baxter, G. (2019). Characterising the fatigue performance of additive materials using the small punch test. Materials Science and Engineering: A, 754, 719-727.
https://doi.org/10.1016/j.msea.2019.03.115, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa49774
Lancaster, R., Jeffs, S., Illsley, H., Argyrakis, C., Hurst, R., Baxter, G., Lancaster, R., & Jeffs, S. (2019). Development of a Novel Methodology to Study Fatigue Properties using the Small Punch Test. Materials Science and Engineering: A, 748, 21-29.
https://doi.org/10.1016/j.msea.2019.01.074, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48614
Lancaster, R., Illsley, H., Jeffs, S., Hurst, R., & Baxter, G. (2018). Application of the small punch test to determine the fatigue properties of additive manufactured aerospace alloys. MATEC Web of Conferences, 165, 02003
https://doi.org/10.1051/matecconf/201816502003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40700
Davies, S., Jeffs, S., Coleman, M., & Lancaster, R. (2018). Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy. Materials & Design, 159, 39-46.
https://doi.org/10.1016/j.matdes.2018.08.039, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa43528
Holmström, S., Li, Y., Dymacek, P., Vacchieri, E., Jeffs, S., Lancaster, R., Omacht, D., Kubon, Z., Anelli, E., Rantala, J., Tonti, A., Komazaki, S., Naveena, ., Bruchhausen, M., Hurst, R., Hähner, P., Richardson, M., & Andres, D. (2018). Creep strength and minimum strain rate estimation from Small Punch Creep tests. Materials Science and Engineering: A, 731, 161-172.
https://doi.org/10.1016/j.msea.2018.06.005, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa40645
Jones, J., Whittaker, M., Lancaster, R., & Williams, S. (2017). The influence of phase angle, strain range and peak cycle temperature on the TMF crack initiation behaviour and damage mechanisms of the nickel-based superalloy, RR1000. International Journal of Fatigue, 98, 279-285.
https://doi.org/10.1016/j.ijfatigue.2017.01.036, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31841
Davies, S., Jeffs, S., Lancaster, R., & Baxter, G. (2017). High Temperature Deformation Mechanisms in a DLD Nickel Superalloy. Materials, 10(5), 457
https://doi.org/10.3390/ma10050457, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa33184
Lancaster, R., Illsley, H., Davies, G., Jeffs, S., Baxter, G., Lancaster, R., & Jeffs, S. (2016). Modelling the small punch tensile behaviour of an aerospace alloy. Materials Science and Technology, 1-9.
https://doi.org/10.1080/02670836.2016.1230168, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29647
Hurst, R., Lancaster, R., Jeffs, S., & Bache, M. (2016). The contribution of small punch testing towards the development of materials for aero-engine applications. Theoretical and Applied Fracture Mechanics, 86, 69-77.
https://doi.org/10.1016/j.tafmec.2016.07.013, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa29302
Lancaster, R., Davies, G., Illsley, H., Jeffs, S., & Baxter, G. (2016). Structural Integrity of an Electron Beam Melted Titanium Alloy. Materials, 9(6)
https://doi.org/10.3390/ma9060470, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa28879
Lancaster, R. & Jeffs, S. (2015). Creep lifing methodologies applied to a single crystal superalloy by use of small scale test techniques. Materials Science and Engineering: A, 636, 529-535.
https://doi.org/10.1016/j.msea.2015.03.119, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20923
Lancaster, R., Harrison, W., & Norton, G. (2015). An analysis of small punch creep behaviour in the γ titanium aluminide Ti–45Al–2Mn–2Nb. Materials Science and Engineering: A, 626, 263-274.
https://doi.org/10.1016/j.msea.2014.12.045, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20140
Lancaster, R. & Jeffs, S. (2015). Elevated Temperature Creep Deformation of a Single Crystal Superalloy through the Small Punch Creep Method. Materials Science & Engineering A, 626, 330-337.
https://doi.org/10.1016/j.msea.2014.12.085, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20139
Lancaster, R. & Whittaker, M. (2014). Non-Invasive Temperature Measurement and Control Techniques under Thermo-Mechanical Fatigue Loading. Materials Science and Technology, 30(15), 1862-1876.
https://doi.org/10.1179/1743284714Y.0000000654, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa20138
Lancaster, R., Perkins, K., Whittaker, M., Lancaster, R., & Jeffs, S. (2014). Prediction of fatigue lives at stress raising features in a high strength steel. International Journal of Fatigue, 59, 301-308.
https://doi.org/10.1016/j.ijfatigue.2013.08.003, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14789
Lancaster, R., Whittaker, M., Williams, S., Whittaker, M., & Lancaster, R. (2013). A review of thermo-mechanical fatigue behaviour in polycrystalline nickel superalloys for turbine disc applications. Materials at High Temperatures, 30(1), 2-12.
https://doi.org/10.3184/096034013x13630238172260, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14477
Lancaster, R. & Harrison, W. (2013). An Empirical Approach to Correlating Thermo-Mechanical Fatigue Behaviour of a Polycrystalline Ni-Base Superalloy. Materials, 6(11), 5275-5290.
https://doi.org/10.3390/ma6115275, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa16953
Whittaker, M., Harrison, W., Lancaster, R., Williams, S., Whittaker, M., Harrison, W., & Lancaster, R. (2013). An analysis of modern creep lifing methodologies in the titanium alloy Ti6-4. Materials Science and Engineering: A, 577, 114-119.
https://doi.org/10.1016/j.msea.2013.03.030, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14565
Harrison, W., Whittaker, M., Lancaster, R., Whittaker, M., Harrison, W., & Lancaster, R. (2013). A model for time dependent strain accumulation and damage at low temperatures in Ti–6Al–4V. Materials Science and Engineering: A, 574, 130-136.
https://doi.org/10.1016/j.msea.2013.02.070, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14559
Whittaker, M., Evans, W., Lancaster, R., Harrison, W., Webster, P., Whittaker, M., Harrison, W., & Lancaster, R. (2009). The effect of microstructure and texture on mechanical properties of Ti6-4. International Journal of Fatigue, 31(11-12), 2022-2030.
https://doi.org/10.1016/j.ijfatigue.2009.02.014, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5830
Evans, W., Lancaster, R., Steele, A., Whittaker, M., Jones, N., Whittaker, M., & Lancaster, R. (2009). Plain and notched fatigue in nickel single crystal alloys. International Journal of Fatigue, 31(11-12), 1709-1718.
https://doi.org/10.1016/j.ijfatigue.2009.03.010, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa5832

Penodau Llyfrau

Lancaster, R. & Jeffs, S. (2018). Small Punch Creep. Creep InTech Open Science
https://doi.org/10.5772/intechopen.70375, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38117
Davies, G., Lancaster, R., Johnston, R., Moyle, D., Thomas, M., Baxter, G., & Robinson, M. (2016). Microstructure and Mechanical Property Relationships in Electron Beam Melted Titanium Alloys. Proceedings of the 13th World Conference on Titanium (pp. 1459-1464). John Wiley & Sons, Inc.
https://doi.org/10.1002/9781119296126.ch246, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa22771
http://dx.doi.org/10.1002/9781119296126.ch246
Johnston, R., Bache, M., Amos, M., Liaptsis, D., Lancaster, R., Lewis, R., Andrews, P., & Edmonds, I. (2012). Investigation of Non-Destructive Evaluation Methods Applied to Oxide/Oxide Fiber Reinforced Ceramic Matrix Composite. Mechanical Properties and Performance of Engineering Ceramics and Composites VII (pp. 57-67). American Ceramic Society
https://doi.org/10.1002/9781118217467.ch6, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa14302

Cyfraniadau Cynadleddau

Lancaster, R., Illsley, H., Hurst, R., Jeffs, S., & Baxter, G. (2017). A Novel Approach to Small Punch Fatigue Testing. In Key Engineering Materials (pp. 61-69).
https://doi.org/10.4028/www.scientific.net/KEM.734.61, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31863
Illsley, H., Lancaster, R., Hurst, R., Jeffs, S., & Baxter, G. (2017). Mechanical Property Characterisation of Electron Beam Melted (EBM) Ti-6Al-4V via Small Punch Tensile Testing. In Key Engineering Materials (pp. 51-60).
https://doi.org/10.4028/www.scientific.net/KEM.734.51, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31864
Davies, S., Lancaster, R., Jeffs, S., & Baxter, G. (2017). Small Punch Testing of Powder Bed Direct Laser Deposits. In Key Engineering Materials (pp. 94-103).
https://doi.org/10.4028/www.scientific.net/KEM.734.94, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31865
Jeffs, S., Lancaster, R., & Davies, S. (2017). Effect of Build Orientation and Post Processing of a Direct Laser Deposited Nickel Superalloy as Determined by the Small Punch Creep Test. In Key Engineering Materials (pp. 128-136).
https://doi.org/10.4028/www.scientific.net/KEM.734.128, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa31866

Cynnyrch Ymchwil Arall

Lancaster, R. & Jeffs, S. (2018). Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques: Proceedings of the 5th International Small Sample Test Techniques Conference SSTT2018
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa41058

Goruchwyliaeth

Untitled (cyfredol)

PhD

Goruchwyliwr arall: Dr Elizabeth Sackett
Assessing the Bond Strength of Transition Welds Manufactured using Laser Powder Bed Fusion (LPBF) (cyfredol)

PhD

Goruchwyliwr arall: Prof Nicholas Lavery
Repair of Next Generation Blisk Alloys Through Additive Manufacture «br /»«br /»«br /»«br /»«br /»«br /»«br /» (cyfredol)

PhD

Goruchwyliwr arall: Prof Nicholas Lavery
Effects of Variability of Additive Manufacturing Processes on Material Properties (cyfredol)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
Additively Manufactured Materials Allowables for Critical Applications (cyfredol)

PhD

Goruchwyliwr arall: Prof Nicholas Lavery
Use of creep-plastic analysis methods to predict complex loading cycle crack growth and nucleation behaviour (cyfredol)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
Understanding creep deformation and lifing approaches for advanced nickel and steel alloys (cyfredol)

PhD

Goruchwyliwr arall: Prof Helen Davies

Goruchwyliwr arall: Prof Helen Davies

Goruchwyliwr arall: Prof Mark Whittaker
Influence of corrosion on high-cycle fatigue behaviour of custom 450 (cyfredol)

PhD

Goruchwyliwr arall: Dr Spencer Jeffs
Novel mechanical evaluation of LBP-DED repairs on abradable systems (cyfredol)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
The Effects of Powder Recycling on the Mechanical Properties of Laser Powder Bed Fusion Stainless Steel for Nuclear Applications (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
Long-Term Environmental Stability of Hybrid Organic Matrix Composite Driveshafts and their Non-Corrosion Resistant Steel Interfaces (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Dr Spencer Jeffs
Environmental and Mechanical Damage Propagation and Stress Concentration of Silicon Carbide Ceramic Matrix Composites (cyfredol)

PhD

Goruchwyliwr arall: Dr Spencer Jeffs
Localised Mechanical Characterisation of High Integrity Material Addition Repairs in Titanium Alloys (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Prof Mark Whittaker
Novel test techniques to characterise the mechanical performance of additive manufactured aerospace alloys. (dyfarnwyd 2024)

PhD

Goruchwyliwr arall: Prof Richard Johnston
The development of low particulate emissions coatings for disc brake components (cyfredol)

EngD

Goruchwyliwr arall: Prof Nicholas Lavery
Mechanical Characterisation of CMSX-3 and CMSX-4 with Pt and PtAl Coatings Under Thermo-Mechanical Fatigue Loading Conditions (cyfredol)

EngD

Goruchwyliwr arall: Dr Jonathan Jones

Goruchwyliwr arall: Prof Mark Whittaker
Understanding the Effect of Surface Finish on the Fatigue Performance of Additive Manufactured Aerospace Components (dyfarnwyd 2024)

EngD

Goruchwyliwr arall: Prof Richard Johnston
Corrosion-Fatigue Study of a Novel Maraging Steel : Atmospheric & Salt Fog Effects (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Dr Spencer Jeffs
Damage Tolerance Study of F1E Steel (cyfredol)

EngD

Goruchwyliwr arall: Prof Mark Whittaker
The Low Cycle Fatigue Behaviour of Laser Powder Bed Fused Stainless Steel 316LN: Build Orientation and Surface Finish Effects (dyfarnwyd 2023)

EngD

Goruchwyliwr arall: Prof Helen Davies
Optimising the Thermomechanical Processing of Waspaloy Forged Products at Blaenavon Forgings Ltd. – Forged Solutions Group (dyfarnwyd 2024)

MSc

Goruchwyliwr arall: Prof Mark Whittaker

Modiwlau a Addysgir

EG-110 Engineering Skills & Applications

Competence in engineering drawing using an industry standard CAD system and essential laboratory skills for Mechanical Engineers.
EG-163 Design and Laboratory Classes 1

Competence in engineering drawing using an industry standard CAD system and essential laboratory skills
EG-287 Materials Practicals 2b: Applied examples in advanced metallic materials

Materials Practicals 2b: Applied examples in advanced metallic materials - identification and assessment of microstructures and mechanical properties of a variety of ferrous and non-ferrous alloys. The module will explore the link between microstructure and mechanical properties and show how processing treatments can radically alter the microstructure and behaviour of materials.
EGA132 Engineering Design 1

Engineering Design 1 aims to introduce students to fundamental principles of engineering design processes. Working on real world engineering problems, students will develop problem-solving skills, creative thinking, and an understanding of design considerations. Emphasis is placed on analysing and solving engineering problems while considering technical, economic, and often, societal factors. The module also focuses on effective communication of design ideas through sketching, CAD and technical drawings. Practical skills are achieved through the manufacturing of protype devices.
EGTM76 Professional Development for Engineers

Professional skills can be defined as the transferable skills needed by an individual to make them `employable¿. Along with good technical understanding and subject knowledge, employers often outline a set of skills that they desire from an employee. These skills are what they believe will equip the employee to carry out their role to the best of their ability. Employability depends on your knowledge, skills and attitudes, how you use those assets, and how you present them to employers. This module will introduce a range of professional skills, the importance of them and how they can be developed and enable the student to assess his/her own weaknesses and strengths in terms of individual and team working environments.

Hanes Gyrfa

PDRA, Prifysgol Abertawe

2007 - 2011
Uwch Arweinydd Prosiect, Prifysgol Abertawe

2011 - 2012
PDRA, Prifysgol Abertawe

2012 - 2013
Darlithydd ISM, Prifysgol Abertawe

2013 - 2015
Uwch Ddarlithydd, Prifysgol Abertawe

2015 - 2017
Athro Cyswllt, Prifysgol Abertawe

2017 - 2020
Athro, Prifysgol Abertawe

2020 - Presennol

Rolau Eraill

Cydlynydd Gwyddor Deunyddiau a Pheirianneg Lefel 2, Prifysgol Abertawe

2019 - Presennol
Aelod Pwyllgor , Pwyllgor Peirianneg Gronynnau IOM3

2018 - Presennol
Cydlynydd Ymchwil Ôl-radd ISM, Prifysgol Abertawe

2017 - Presennol
Mentor ac Aseswr Cymrodoriaeth HEA Hyfforddedig 2017, Prifysgol Abertawe

2017 - Presennol
Aelod o bwyllgor BSi ISE/101/01 Uniaxial Testing, BSi

2017 - Presennol
Aelod gwâdd o Bwyllgor Llywio Rhyngwladol SSTT, Cyfres Cynadleddau Technegau Profi Samplau Bach

2016 - Presennol
Cymrawd yr Academi Addysg Uwch (HEA), HEA

2016 - Presennol
Cynrychiolydd ar Bwyllgor Moeseg a Llywodraethiant Ymchwil MRC, Prifysgol Abertawe

2015 - Presennol
Aseswr Cofrestredig ceisiadau CEng ar ran IOM3, IOM3

2015 - Presennol
Ysgrifennydd, Pwyllgor Strwythur a Nodweddion Deunyddiau IOM3

2013 - Presennol
Wedi gweithredu fel arholwr i 5 o brifysgolion y DU, n/a

2013 - Presennol

Cyflwyniadau, Darlithoedd a Chynadleddau a wahoddwyd

Aelod o’r Pwyllgor Trefnu ar gyfer symposiwm penodol ar 'Small-Specimen Testing' yn y 15ed Gyngres Ryngwladol ar Doriadau

2021

Atlanta, USA
Cyflwyniad gwadd yn yr International Conference on Plasticity, Damage and Fracture 2020

2020

Cancun, Mexico
Aelod o Bwyllgor Trefnu’r EPSRC/Rolls-Royce Strategic Partnership Conference 2019

2019

Trondheim, Norway
Cyflwyniad gwadd yn yr EPERC International Conference on Pressure Equipment Innovation and Safety 1af

2019

Rhufain, Yr Eidal
Cadeirydd Rhyngwladol y Small Sample Test Techniques Conference 2018

2018

Prifysgol Abertawe
Golygydd gwadd rhifyn arbennig o Theoretical & Applied Fracture Mechanics ar ‘Fracture Mechanics in Miniaturised Testing’

2018

AMH
Aelod o Bwyllgor Trefnu’r IOM3 Additive Manufactured Metallic Materials Properties & Structures Conference 2 2017

2017

Manufacturing Technology Centre, Coventry
Cadeirydd gwadd Sesiwn Lawn Agoriadol SSTT2016

2016

Shanghai, China
Golygydd gwadd rhifyn arbennig o Materials yng nghynhadledd ryngwladol SSTT2016, Shanghai, China

2016

AMH
Cyflwyniad gwadd yn yr Advances in Materials Testing and Temperature Measurement Techniques Conference

2016

AMRC, Sheffield
Cyhoeddiad gwadd yn Theoretical & Applied Fracture Mechanics

2016

AMH
Aelod o Bwyllgor Trefnu IOM3 Additive Manufactured Metallic Materials Properties & Structures Conference 2015

2015

Manufacturing Technology Centre, Coventry
Cyhoeddiad gwadd yn Materials Science & Technology

2015

AMH
Golygydd gwadd rhifyn arbennig o Materials ar ‘Failure Analysis in Materials’

2015

AMH
Aelod o Bwyllgor Trefnu’r EPSRC/Rolls-Royce Strategic Partnership Conference 2013

2013

Abertawe
Cyhoeddiad gwadd yn Materials Science & Technology

2013

AMH

Ymgysylltu Cyhoeddus

• Gwyddoniaeth Stryd 2014
• Royal International Air Tatoo 2014
• Llysgennad STEM
• CSI Abertawe 2012
• Big Bang Cymru 2012
• Ffug Gyfweliadau Mynediad i’r Brifysgol – Ysgol Gyfun Gellifedw

Yr Athro Robert Lancaster

Rhif ffôn

Cyfeiriad ebost

Welsh language proficiency

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Uchafbwyntiau Ymchwil

Holl Ymchwil

Untitled (cyfredol)

Assessing the Bond Strength of Transition Welds Manufactured using Laser Powder Bed Fusion (LPBF) (cyfredol)

Repair of Next Generation Blisk Alloys Through Additive Manufacture «br /»«br /»«br /»«br /»«br /»«br /»«br /» (cyfredol)

Effects of Variability of Additive Manufacturing Processes on Material Properties (cyfredol)

Additively Manufactured Materials Allowables for Critical Applications (cyfredol)

Use of creep-plastic analysis methods to predict complex loading cycle crack growth and nucleation behaviour (cyfredol)

Understanding creep deformation and lifing approaches for advanced nickel and steel alloys (cyfredol)

Influence of corrosion on high-cycle fatigue behaviour of custom 450 (cyfredol)

Novel mechanical evaluation of LBP-DED repairs on abradable systems (cyfredol)

The Effects of Powder Recycling on the Mechanical Properties of Laser Powder Bed Fusion Stainless Steel for Nuclear Applications (dyfarnwyd 2024)

Long-Term Environmental Stability of Hybrid Organic Matrix Composite Driveshafts and their Non-Corrosion Resistant Steel Interfaces (dyfarnwyd 2024)

Environmental and Mechanical Damage Propagation and Stress Concentration of Silicon Carbide Ceramic Matrix Composites (cyfredol)

Localised Mechanical Characterisation of High Integrity Material Addition Repairs in Titanium Alloys (dyfarnwyd 2024)

Novel test techniques to characterise the mechanical performance of additive manufactured aerospace alloys. (dyfarnwyd 2024)

The development of low particulate emissions coatings for disc brake components (cyfredol)

Mechanical Characterisation of CMSX-3 and CMSX-4 with Pt and PtAl Coatings Under Thermo-Mechanical Fatigue Loading Conditions (cyfredol)

Understanding the Effect of Surface Finish on the Fatigue Performance of Additive Manufactured Aerospace Components (dyfarnwyd 2024)

Corrosion-Fatigue Study of a Novel Maraging Steel : Atmospheric & Salt Fog Effects (dyfarnwyd 2023)

Damage Tolerance Study of F1E Steel (cyfredol)

The Low Cycle Fatigue Behaviour of Laser Powder Bed Fused Stainless Steel 316LN: Build Orientation and Surface Finish Effects (dyfarnwyd 2023)

Optimising the Thermomechanical Processing of Waspaloy Forged Products at Blaenavon Forgings Ltd. – Forged Solutions Group (dyfarnwyd 2024)

EG-110 Engineering Skills & Applications

EG-163 Design and Laboratory Classes 1

EG-287 Materials Practicals 2b: Applied examples in advanced metallic materials

EGA132 Engineering Design 1

EGTM76 Professional Development for Engineers

PDRA, Prifysgol Abertawe

Uwch Arweinydd Prosiect, Prifysgol Abertawe

PDRA, Prifysgol Abertawe

Darlithydd ISM, Prifysgol Abertawe

Uwch Ddarlithydd, Prifysgol Abertawe

Athro Cyswllt, Prifysgol Abertawe

Athro, Prifysgol Abertawe

Cydlynydd Gwyddor Deunyddiau a Pheirianneg Lefel 2, Prifysgol Abertawe

Aelod Pwyllgor , Pwyllgor Peirianneg Gronynnau IOM3

Cydlynydd Ymchwil Ôl-radd ISM, Prifysgol Abertawe

Mentor ac Aseswr Cymrodoriaeth HEA Hyfforddedig 2017, Prifysgol Abertawe

Aelod o bwyllgor BSi ISE/101/01 Uniaxial Testing, BSi

Aelod gwâdd o Bwyllgor Llywio Rhyngwladol SSTT, Cyfres Cynadleddau Technegau Profi Samplau Bach

Cymrawd yr Academi Addysg Uwch (HEA), HEA

Cynrychiolydd ar Bwyllgor Moeseg a Llywodraethiant Ymchwil MRC, Prifysgol Abertawe

Aseswr Cofrestredig ceisiadau CEng ar ran IOM3, IOM3

Ysgrifennydd, Pwyllgor Strwythur a Nodweddion Deunyddiau IOM3

Wedi gweithredu fel arholwr i 5 o brifysgolion y DU, n/a

Aelod o’r Pwyllgor Trefnu ar gyfer symposiwm penodol ar 'Small-Specimen Testing' yn y 15ed Gyngres Ryngwladol ar Doriadau

Cyflwyniad gwadd yn yr International Conference on Plasticity, Damage and Fracture 2020

Aelod o Bwyllgor Trefnu’r EPSRC/Rolls-Royce Strategic Partnership Conference 2019

Cyflwyniad gwadd yn yr EPERC International Conference on Pressure Equipment Innovation and Safety 1af

Cadeirydd Rhyngwladol y Small Sample Test Techniques Conference 2018

Golygydd gwadd rhifyn arbennig o Theoretical & Applied Fracture Mechanics ar ‘Fracture Mechanics in Miniaturised Testing’

Aelod o Bwyllgor Trefnu’r IOM3 Additive Manufactured Metallic Materials Properties & Structures Conference 2 2017

Cadeirydd gwadd Sesiwn Lawn Agoriadol SSTT2016

Golygydd gwadd rhifyn arbennig o Materials yng nghynhadledd ryngwladol SSTT2016, Shanghai, China

Cyflwyniad gwadd yn yr Advances in Materials Testing and Temperature Measurement Techniques Conference

Cyhoeddiad gwadd yn Theoretical & Applied Fracture Mechanics

Aelod o Bwyllgor Trefnu IOM3 Additive Manufactured Metallic Materials Properties & Structures Conference 2015

Cyhoeddiad gwadd yn Materials Science & Technology

Golygydd gwadd rhifyn arbennig o Materials ar ‘Failure Analysis in Materials’

Aelod o Bwyllgor Trefnu’r EPSRC/Rolls-Royce Strategic Partnership Conference 2013

Cyhoeddiad gwadd yn Materials Science & Technology